528945

Zanker KDT10000FB Manual

27
Zoom out
Zoom in
Previous page
1/60
Next page
Malfunction Possible cause Possible solution
The appliance does not fill with wa-
ter.
The water tap is blocked or there is
limescale on it.
Clean the water tap.
The water pressure is too low. Contact your local water authority.
The water tap is closed. Open the water tap.
The filter in the water inlet hose is
blocked.
Clean the filter.
The connection of the water inlet
hose is not correct.
Make sure that the connection is
correct.
The water inlet hose is damaged. Make sure that the water inlet hose
has no damages.
The appliance does not drain the
water.
There is a blockage in the sink spi-
got.
Clean the sink spigot.
The connection of the water drain
hose is not correct.
Make sure that the connection is
correct.
The water drain hose is damaged. Make sure that the water drain
hose has no damages.
The anti-flood device is on. Close the water tap and contact the
service centre.
The start of the washing pro-
gramme does not occur.
The appliance door is open. Close the appliance door.
The mains plug is not connected in
the mains socket.
Connect the mains plug.
The fuse in the fuse box is dam-
aged.
Replace the fuse.
After the check, activate the appliance. The programme
continues from the point of interruption.
If the malfunction occurs again, contact the service cen-
tre.
If the display shows other alarm codes, contact the
service centre.
The necessary information for the service centre is on
the rating plate.
Record this information:
– Model (MOD.) ........................................................
– Product number (PNC) ..........................................
– Serial number (S.N.) ..............................................
The washing results and drying results are not satisfactory
Problem Possible cause Possible solution
The dishes are not clean. The selected washing programme
was not applicable for the type of
load and soil.
Make sure that the washing pro-
gramme is applicable for the type of
load and soil.
27
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KDT10000FB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KDT10000FB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info