Manual Zanker KDT10000FB (page 28 of 60) (English, German, Dutch, French)

528945

Zoom out

Zoom in

1/60

Problem Possible cause Possible solution

The baskets were not loaded cor-

rectly, water did not touch all surfa-

ces.

Load the baskets correctly.

The spray arms could not turn free-

ly because of incorrect arrange-

ment of the load.

Make sure that an incorrect ar-

rangement of the load does not

cause a blockage of the spray

arms.

The filters are dirty or not assem-

bled and installed correctly.

Make sure that the filters are clean

and correctly assembled and instal-

led.

The quantity of detergent was not

sufficient or missing.

Make sure that the quantity of de-

tergent is sufficient.

Limescale particles on the dishes. The salt container is empty. Fill the salt container with dishwash-

er salt.

Incorrect water softener adjustment Adjust the water softener.

The salt container cap is not closed

correctly.

Make sure that the salt container

cap is closed correctly.

There are streaks, milky stains, or a

bluish layer on glasses and dishes.

Rinse aid dosage is too high. Decrease the rinse aid dosage.

Dry water drop stains on glasses

and dishes.

Rinse aid dosage is too low. Increase the rinse aid dosage.

The detergent can be the cause. Use a different brand of detergent.

The dishes are wet. You have set a washing pro-

gramme without drying phase or

with a decreased drying phase.

Let the door stay ajar for some mi-

nutes before you remove the

dishes.

The dishes are wet and dull. The rinse aid dispenser is empty. Fill the rinse aid dispenser with

rinse aid.

Technical data

Dimensions Width 596 mm

Height 818-898 mm

Depth 555 mm

Water supply pressure Minimum 0.5 bar (0.05 MPa)

Maximum 8 bar (0.8 MPa)

Water supply

Cold water or hot water maximum 60 °C

Capacity Place settings 12

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KDT10000FB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanker KDT10000FB Manual

Product: