528945

Zanker KDT10000FB Manual

26
Zoom out
Zoom in
Previous page
1/60
Next page
1 2
Clean the filters below
running water.
3
To remove filters B and
C, turn the handle ap-
proximately 1/4 counter-
clockwise .
4
Remove the flat filter A
from the bottom of the
appliance.
5
Put the flat filter A in the
bottom of the appliance.
Install the flat filter cor-
rectly under the two
guides D.
6
Put the filter system in
position. To lock the filter
system, turn the handle
clockwise until it locks in
position.
To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clogged, remove
remaining parts of soil with a thin pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance and con-
trol panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive cleaning pads
or solvents (acetone).
What to do if…
The start of the appliance does not occur or it stops
during operation.
First try to find a solution to the problem (refer to the
table). If not, contact the service centre.
With some malfunctions the indicators flash to
show an alarm code.
Alarm code Malfunction
• The programme indicator flashes continuously.
• The end indicator flashes one time intermittently.
The appliance does not fill with water.
• The programme indicator flashes continuously.
• The end indicator flashes two times intermittently.
The appliance does not drain the water.
• The programme indicator flashes continuously.
• The end indicator flashes three times intermittently.
The anti-flood device is on.
Warning! Deactivate the appliance before you do
the checks.
26
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KDT10000FB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KDT10000FB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info