528945

Zanker KDT10000FB Manual

25
Zoom out
Zoom in
Previous page
1/60
Next page
1 2
Do these steps to move the upper basket to the higher
position:
1. Move the front runner stops (A) out.
2. Pull the basket out.
3. Put the basket in the higher or lower position.
4. Put back the front runner stops (A) in their initial
position.
Caution! If the basket is in the higher position, do
not put cups on the cup racks.
Setting and starting a washing programme
Starting the washing programme
1. Activate the appliance. Make sure that the appli-
ance is in setting mode.
2. To set a washing programme, press the pro-
gramme button again and again until the related
programme indicator comes on.
3. Close the appliance door, the washing programme
starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point
of interruption.
Cancelling the washing programme
If the washing programme has not started, you can
change the selection.
To change the selection while a washing programme
operates, it is necessary to cancel the programme.
1. Open the appliance door.
2. Press and hold the programme button until the pro-
gramme indicator goes off and the end indicator
starts to flash.
Make sure that there is detergent in the detergent
dispenser before you start a new washing pro-
gramme.
End of the washing programme
When the washing programme is completed, an inter-
mittent acoustic signals sounds.
1. Open the appliance door.
• The end indicator is on.
2. Deactivate the appliance.
Remove the items from the baskets
• Let the dishes become cold before you remove them
from the appliance. Hot dishes can be easily dam-
aged.
• First remove the items from the lower basket, then
from the upper basket.
• There can be water on the sides and on the door of
the appliance. Stainless steel becomes cool more
quickly than the dishes.
Care and cleaning
To remove and clean the filters
Dirty filters decrease the washing results.
25
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KDT10000FB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KDT10000FB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info