528945

Zanker KDT10000FB Manual

23
Zoom out
Zoom in
Previous page
1/60
Next page
Use of detergent and rinse aid
2
0
0
3
1
2
3
4
-
+
M
A
x
8
1
2
3
4
5
6
7
Use of detergent
To help the environment, do not use more than
the correct quantity of detergent.
Follow the detergent manufacturer recommendations
on the detergent packaging.
Do these steps to fill the detergent dispenser:
1.
Press the release button
2
to open the lid
8
of
the detergent dispenser.
2.
Put the detergent in the dispenser
1
.
3. If the washing programme has a prewash phase,
put a small quantity of detergent in the prewash
detergent compartment
3
.
4. If you use the detergent tablets, put the tablet in
the detergent dispenser
1
.
5. Close the detergent dispenser. Press the lid until it
locks into position.
Different brands of detergent dissolve in different
times. Some detergent tablets do not have the
best cleaning results during short washing pro-
grammes. Use long washing programmes when you
use the detergent tablets to fully remove the detergent.
Use of rinse aid
Rinse aid makes it possible to dry the dishes with-
out streaks and stains.
The rinse aid dispenser automatically adds rinse aid
during the last rinsing phase.
Do these steps to fill the rinse aid dispenser:
1.
To open the rinse aid dispenser, turn the cap
4
counterclockwise
2.
Fill the rinse aid dispenser
6
with rinse aid. The
mark 'max' shows the maximum level.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent too much foam during the washing
programme.
4. To close the rinse aid dispenser, put the cap in po-
sition and turn it clockwise.
Fill the rinse aid dispenser when the indicator
5
becomes clear.
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between position 1
(lowest dosage) and position 4 (highest dosage).
Turn the rinse aid selector
7
to increase or decrease
the dosage.
Using combi detergent tablets
These tablets contain agents as detergent, rinse aid
and dishwasher salt. Some types of tablets can contain
other agents.
When you use tablets, that contain salt and rinse aid,
do not fill the salt container and rinse aid dispenser.
Be sure that these tablets are applicable for the water
hardness in your area (refer to the instructions on the
packaging of the products).
1. Adjust the water hardness to the lowest level. Refer
to 'Setting the water softener'.
2. Set the rinse aid dosage to the lowest position. Re-
fer to 'Use of detergent and rinse aid'.
Using again separately detergent, salt and rinse aid
1. Fill the salt container and the rinse aid dispenser.
2. Adjust the water hardness to the highest level.
3. Start a washing programme without dishes.
4. When the washing programme is completed, adjust
the water softener to the water hardness in your
area.
5. Adjust the quantity of rinse aid.
23
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KDT10000FB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KDT10000FB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info