Manual Zanker KDT10000FB (page 22 of 60) (English, German, Dutch, French)

528945

Zoom out

Zoom in

1/60

Manual adjustment

Turn the water hardness

dial to the position 1 or 2

(refer to the table).

Electronic adjustment

1. Activate the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold the programme button until the pro-

gramme indicator (A) starts to flash and the pro-

gramme indicator (B) comes on.

4. When the programme indicator (B) goes off and the

end indicator starts to flash, press the programme

button. The programme indicator (A) continues to

flash. The electronic adjustment of the water soft-

ener is activated.

5. The end indicator shows the setting of the water

softener. The number of flashes of the end indica-

tor is the same as the water hardness level (exam-

ple: 5 flashes / pause / 5 flashes = level 5).

6. Press the programme button to change the adjust-

ment. Press the programme button again and

again to change the setting. When the programme

button is pressed, the level number increases.

7. Deactivate the appliance to confirm.

If the water softener is set electronically to the lev-

el 1, the salt indicator light stays off.

Use of dishwasher salt

1 2

Fill the salt container with

1 litre of water (only for

the first time you fill with

salt).

It is correct that water comes out from the salt

container when you fill it with salt.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KDT10000FB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanker KDT10000FB Manual

Product: