669800

Yuneec Tornado H920 Industry Manual

28
Zoom out
Zoom in
Previous page
1/39
Next page
STEP 4) If it is the first time to bind your
GB603 gimbal or V18 gimbal camera to the
ST24, you need to insert the password:
87654321. If it is the first time to bind your
CGO4 gimbal camera to the ST24, you need to
insert the password: 1234567890. Press OK on
the pop-up window to continue.
STEP 5) Wait till the WiFi signal icon
appears, Tap Camera Select and select your
camera (Panasonic GH4, SONYα7, CGO4 or
V18), and then tap Select.
BINDING THE GB603 GIMBAL/ V18/CGO4 GIMBAL CAMERA TO THE OTHER ST24
NOTICE: The team mode requires two ST24 transmitters.
IMPORTANT NOTE: Make sure there is a receiver in your GB603. Otherwise you need
to buy one from YUNEEC.
STEP 1) Power on the other ST24, tap to go to the main interface. Tap the FPV icon,
and enter Model Select.
STEP 2) Switch on the TORNADO H920. Wait until one indicator of LK 58 is solid red and
another blinks blue slowly (the indicator of CGO4 blinks green slowly). That means the Wi-Fi
has started up.
STEP 3) Select System settings and switch on the TORNADO. Wait until the gimbal,
LK58 and GB603/V18/CGO4 are all ready. The receiver will blink orange quickly,
which means the process of binding is entered automatically. Tap refresh, the receiver
code will be shown in the Model column and the WIFI code will be shown in the
Camera column. Choose them and tap bind.
STEP 6)
Tap [ ] to go to the main interface, then imagies will be shown on the screen.
NOTICE: If the model chosen has never been bound before, 'NOT CONNECTED' will
display in the MODEL column, and the remote controller can bind any YUNEEC
SR12/24 receiver. If a series of receiver codes display on the screen, it means the
model was bound before and can't be bound to any other receiver. If you want to bind
this model to other receiver,you can press and hold the model icon in the MODEL
SELECT interface till a pop-up window comes out, tap 'Copy', and then select the
model newly created.
27
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 Industry at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 Industry in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info