624619
10
Zoom out
Zoom in
Previous page
1/17
Next page
20. 21.
FRAME ASSEMBLY
Make sure your tools are in good condition.
A worn allen key can round the hex on a bolt
not allowing for proper torque.
Torque settings are listed throughout the
instructions. It is also import to prep all bolt
threads. The instructions denote whether to
use a Loctite compound or grease.
YETI TIPS TOOLS NEEDED
Warning: Service on Yeti bicycles requires special knowledge
and tools. Yeti Cycles recommends that all service and
repairs be performed by an authorized Yeti Dealer
Dead blow hammer
2.5mm allen key
Two - 5mm allen keys
Two - 6mm allen keys
10mm allen key
Guide pin tool
Lock ring pliers
Grease
Blue (248) Loctite
Pink (222) Loctite
Torque wrench
All the parts you’ll need to get your SB6c put
together.
Slip washers onto and apply blue (248) Loctite to
the 4 bolts that secure the Switch Innity Link to
the frame. Insert them into their place and hang
the black Innity link tting washers from them.
Place them with the at side toward the opening.
Insert the Innity Link from the non-drive side.
The Innity logo should be up and the Fox logos
facing the non-drive side. Rock the link into
place capturing the black tting washers. Make
sure that they have not slipped or rotated. The
at end of the tting washers must be facing the
opening in the frame.
01. 02.
03. 04.
While holding the link in place lightly tighten the
bolts. You want them to snug so that the link
does not move and so that the tting washers
are fully captured, but don’t try to torque them by
hand! Finish the job with a torque wrench.
Torque to 14 Nm
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeti Cycles SB6C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeti Cycles SB6C in the language / languages: English as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info