624619
8
Zoom out
Zoom in
Previous page
1/17
Next page
16. 17.
DERAILLEUR HANGER INSTALLATION
01. HANGER SEAT 02. HANGER CAP SEAT
Lightly grease the outside surface of the hanger
where it interfaces with the frame. The hanger
will t into its space on the inside of the swingarm
and presses easily into the frame.
Lightly grease the threasd on the hanger cap.
The hanger cap REVERSE threads into the
hanger from the outside of the swing arm. Hand
thread the cap into the hanger.
03. TIGHTENING 02. COMPLETED
Using a 6mm allen key, tighten the hanger cap
into the hanger. REMEMBER, it is REVERSE
THREADED. Follow the “Tighten” arrow on the
cap.
*Torque to 80 in/lbs (9Nm)
The installed hanger and cap should look like this,
sittign ush against the frame on both the inside
and outside of the swing arm. If the hanger
or cap are not sitting uch against the frame,
remove them and inspect the frame surfaces for
debris as well as the threads for damage.
NOTE: The hanger cap is REVERSE
THREADED. Be careful not to strip out the
Hanger tool faces. The cap is marked with a
tighten direction arrow.
Inspect the frame around the hanger seat for
any suspicious damage any time you replace
a hanger, but especially if you are replacing it
due to damage.
YETI TIPS TOOLS NEEDED
6mm Allen key
Grease
DERAILLEUR HANGER INSTALL
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeti Cycles SB6C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeti Cycles SB6C in the language / languages: English as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info