624619
12
Zoom out
Zoom in
Previous page
1/17
Next page
Prepare both your collet bolts with grease. You
want to have grease on the threads and on the
collet wedge.
24. 25.
Prep and install the male shock mounting
hardware on both ends of the shock. Apply Blue
Loctite (248) to the threads and install the washer.
Thread the bolt in snug, but do not torque.
Time to get the torque wrench out. Using a 5mm
allen on one side and your properly calibrated
torque wrench on the other torque the shock
mounting hardware on both ends of the shock.
Torque to 6.5 Nm
Using a 10mm allen wrench nish tightening the
main pivot axle and the upper link axle. Torque
the pivot axles using a properly calibrated torque
wrench.
Torque to 8 Nm
13. 14.
15.
16.
17.
ASSEMBLY
ASSEMBLY
Using a soft mallet push the female shock
mounting hardware through the frame and shock
on the Fox Guide Pins.
Using a 5mm allen wrench, thread both collet
bolts into the pivot axles. Finish tightening using
a properly calibrated torque wrench.
Torque to 10 Nm
18.
FRAME ASSEMBLY IS COMPLETE. NOW
GET YOUR PARTS ON THERE AND GO FOR
A RIDE!
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeti Cycles SB6C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeti Cycles SB6C in the language / languages: English as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info