734892
11
Zoom out
Zoom in
Previous page
1/31
Next page
11
OPERATION
HOW TO USE YOUR PRESSURE
WASHER
If you have any problems operating your pressure washer,
please call the pressure washer helpline at 1-866-902-9690.
Pressure Washer Location
Carbon Monoxide Poisoning
WARNING! POISONOUS GAS HAZARD.
Engine exhaust contains carbon monoxide, a
poisonous gas that could kill you in minutes.
You CANNOT smell it, see it, or taste it, Even if you do not
smell exhaust fumes, you could still be exposed to carbon
monoxide gas.
• Operate this product ONLY outside far away from
windows, doors and vents to reduce the risk of carbon
monoxide gas from accumulating and potentially being
drawn towards occupied spaces.
• Install battery-operated carbon monoxide alarms or
plug-in carbon monoxide alarms with battery back-up
according to the manufacturer's instructions. Smoke
alarms cannot detect carbon monoxide gas.
• DO NOT run this product inside homes, garages,
basements, crawlspaces, sheds, or other partially
enclosed spaces even if using fans or opening doors
and windows for ventilation. Carbon monoxide can
quickly build up in these spaces and can linger for hours,
even after this product has shut o.
ALWAYS place this product downwind and point the
engine exhaust away from occupied spaces.
If you start to feel sick, dizzy, or weak while using this
product, shut it o and get to fresh air RIGHT AWAY. See a
doctor. You may have carbon monoxide poisoning.
Risk of Fire Clearances
WARNING Exhaust heat/gases could ignite
combustibles, structures or damage fuel tank
causing a re, resulting in death or serious injury.
• Keep at least 5 ft. (1.5 m) clearance on all sides of
pressure washer including overhead.
To Start Your Pressure Washer
To start your engine-powered pressure washer for the rst
time, follow these instructions step-by-step. This starting
information also applies whenever you start the engine after
you have let the pressure washer sit idle for at least a day.
1.Place pressure washer outside near an water source
capable of supplying water at a ow rate greater than 3.7
gallons per minute and no less than 20 PSI at pressure
washer end of garden hose.
2.Check that high pressure hose is tightly connected to
spray gun and pump. See “Assembly” for illustrations.
3.Make sure unit is in a level position.
4.Connect garden hose to water inlet on pressure washer
pump.
CAUTION! Do Not run the pump without the water supply
connected and turned on.
• Damage to pressure washer resulting from failure to
follow this instruction will void warranty.
5.Turn ON the water, point the spray gun at a safe
direction, release the red trigger lock, then squeeze
trigger to purge the pump system of air and impurities.
See "Assembly" .
6. Attach the spray wand into spray gun. Tighten by hand.
See "Assembly" .
7.Choose the quick-connect nozzle you want to use, pull
back on collar of spray wand , insert the nozzle and
release collar. Tug on the nozzle to make sure it is
securely in place. See "Assembly" . More information
please see “How to Use Quick-Connect Nozzles”
section.
8. Engage the red trigger lock on the spray gun.
9. Push engine rocker switch (A) to ON (ON) position.
A
Exhaust port pointed away
from occupied spaces
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce Y0GWC3200R0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce Y0GWC3200R0 in the language / languages: English as an attachment in your email.

The manual is 7,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info