734892

Yardforce Y0GWC3200R0 Manual

13
Zoom out
Zoom in
Previous page
1/31
Next page
13
gun while system is pressurized.
• NEVER aim spray gun at people, animals, or plants.
• DO NOT secure spray gun in open position.
• DO NOT leave spray gun unattended while machine is
running.
• NEVER use a spray gun which does not have a trigger
lock or trigger guard in place and in working order.
• Always be certain spray gun, nozzles and accessories
are correctly attached.
WARNING! Exhaust heat/gases could ignite
combustibles, structures or damage fuel
tank causing a re, resulting in death or
serious injury.
Contact with muer area could cause burns resulting in
serious injury.
• DO NOT touch hot parts and AVOID hot exhaust gases.
• Allow equipment to cool before touching.
• Keep at least 5 ft. (1.5 m) of clearance on all sides of
pressure washer including overhead.
• It is a violation of California Public Resource Code,
Section 4442, to use or operate the engine on any forest
covered, brush-covered, or grass-covered land unless
the exhaust system is equipped with a spark arrester, as
dened in Section 4442, maintained in eective working
order. Other states or federal jurisdictions may have
similar laws.
Contact the original equipment manufacturer, retailer, or
dealer to obtain a spark arrester designed for the exhaust
system installed on this engine.
• Replacement parts must be the same and installed in
the same position as the original parts.
How to Stop Your Pressure Washer
1.Release spray gun trigger and let engine idle for two
minutes.
2. Push engine rocker switch to OFF (0) position.
3. ALWAYS point spray gun at a safety direction, release
the red trigger lock, and squeeze the trigger to release
retained high water pressure.
WARNING! The high pressure stream of water that this
pressure washer produces could cut through skin
and its underlying tissues, resulting in serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which could result in
serious injury.
• Keep high pressure hose connected to pump and spray
gun while system is pressurized.
• Every time when you stop engine, ALWAYS point spray
gun at safety direction, release the red trigger lock, and
squeeze spray gun trigger to release high pressure.
NOTE: A small amount of water will squirt out when you
release the pressure.
How To Use Quick-Connect Nozzles
The quick-connect on the spray wand allows you to switch
between four dierent quick-connect nozzles. Nozzles can
be changed while pressure washer is running once spray
gun trigger is locked. The nozzles vary the spray pattern as
shown.
Follow these instructions to change nozzles:
1.Pull back collar on spray wand and pull current nozzle o.
Store nozzles in holder provided on the top of hose reel.
WARNING The high pressure stream of water that
this equipment produces could cut through skin
and its underlying tissues, resulting in serious
injury and possible amputation.
• NEVER change nozzles without the trigger locked on the
spray gun.
• DO NOT twist nozzles while spraying.
2.Select desired nozzle.
The spray nozzles are in dierent colors, below are some
suggestion for dierent purposes.
• For general rinsing, ideal for most all purpose cleaning
such as home siding, brick patios, wood decks,
driveways and sidewalks, garage floors, etc., select
yellow 15° nozzle.
• For delicate rinse, for gentle cleaning of cars trucks,
boats, RV's, patio furniture, lawn equipment, etc., select
white 40° nozzle.
• To apply detergent, applies project specific cleaners to
help break down stubborn dirt and grime on a variety of
surfaces, select black detergent nozzle.
• For rotating flush, quick high flow clean up and long
reach of cleaning of second story siding and window,
select turbo nozzle.
3.Pull back on collar, insert new nozzle and release collar.
Tug on nozzle to make sure it is securely in place.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce Y0GWC3200R0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce Y0GWC3200R0 in the language / languages: English as an attachment in your email.

The manual is 7,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info