734892
12
Zoom out
Zoom in
Previous page
1/31
Next page
12
NOTICE:
Before starting the pressure washer, be sure you
are wearing safety goggles as described below.
WARNING! Risk of eye injury.
Spray could splash back or propel objects resulting
in serious injury.
Always wear indirect vented (chemical splash) safety
goggles marked to comply with ANSI Z87.1 when using
or in vicinity of this equipment.
NEVER substitute safety glasses or dry-condition
goggles for indirect vented safety goggles.
10.Move the fuel valve lever to "On" position.
11.Move the choke lever to "Choke" position.
NOTE: For a warm engine, be sure the choke lever is in
the "RUN" position.
12. Move the throttle lever away from the MIN. position
(symbol tortoise), move toward the MAX. position
(symbol rabbit).
13.When starting engine, position yourself as recommended
below and grasp starter grip handle and pull slowly until you
feel some resistance. Then pull rapidly to start engine.
14.Return the starter grip handle slowly. Do Not let rope
"snap back" against starter.
WARNING! Starter cord kickback (rapid retraction) will
pull hand and arm toward engine faster than
you can let go which could cause broken bones,
fractures, bruises, or sprains resulting in serious
injury.
pressure.
When starting engine, pull cord slowly until resistance is
felt and then pull rapidly to avoid kickback.
After each starting attempt, where engine fails to run,
always point spray gun at safety direction, release
the red trigger lock, and squeeze spray gun trigger to
release high pressure.
Firmly grasp spray gun with both hands when using high
pressure spray to avoid injury when spray gun kicks
back.
15.When engine starts, slowly move choke lever to the
"Run" position. If engine falters, move choke lever to the
"Choke" position, then to the "Run" position.
16.If engine fails to start after six pulls, move choke lever to
run, move choke lever to the "Choke" position, then to the
"Run" position.
17.Point spray gun at a safety direction, relea se the red
trigger lock, and squeeze the trigger to start your washing
work.
NOTE:If the recoil starter is hard to pull, it may be necessary
to squeeze the gun trigger to relieve internal pump pressure.
WARNING! The high pressure stream of water that this
pressure washer produces could cut through skin
and its underlying tissues, resulting in serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which could result in
serious injury.
• DO NOT allow CHILDREN to operate pressure washer.
Keep high pressure hose connected to pump and spray
CHOKE LEVER
FUEL VALVE LEVER
Fuel Valve Lever “ON” Position
Hold By One Hand
Pull Recoil Starter By
The Other Hand
THROTTLE LEVER
MAX. MIN.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce Y0GWC3200R0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce Y0GWC3200R0 in the language / languages: English as an attachment in your email.

The manual is 7,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info