Manual Yamaha YAS-201 (page 13 of 100) (English, German, Dutch, French, Italian, Swedish, Spanish)

516966

Zoom out

Zoom in

1/100

HINT

• The TV Remote Repeater function is disabled by default.

• If you have made the sound bar learn the volume (+) operation (p.10), the volume of the TV may be turned up when

you turn up the volume of the sound bar with the TV remote control. In this case, follow Step 3 in “Connections” (p.7)

to change the TV setting.

• You can check the status of the TV Remote Repeater function by the center indicator when turning on the sound bar.

Off (enabled), lights up (disabled)

Changing the group ID

To establish a wireless connection (AirWired) between Yamaha products, you need to set both the

products to the same group.

You can change the group ID of the sound bar and subwoofer by the group ID switches on the

subwoofer. If you change the group ID on the subwoofer, it will be reected to the sound bar when the

sound bar is turned on the next time.

A C 1 2

A1*

A C 1 2

Group ID switches (rear panel of the subwoofer)

* Default setting

NOTE

• If a wireless connection between the sound bar and

subwoofer cannot be established, see “No sound is coming

from the subwoofer.” in “Troubleshooting” (p.12).

• To establish a wireless connection (AirWired) to another

Yamaha product (such as a transmitter), set the sound bar

(subwoofer) and your Yamaha product to the same group.

• When using another Yamaha product (such as a

transmitter), terminate a wireless connection between your

Yamaha product and the sound bar (subwoofer) before

changing the group ID. Reestablish a wireless connection

between them after conrming that the sound bar and

subwoofer are properly connected with a new group ID.

• Use set C1 or C2 when playing music stored on a computer

via the transmitter. Refer to the transmitter's Owner's

Manual for details.

In all other cases, select a group ID from set A1, A2, C1 or

C2 to achieve a stable wireless connection.

Initializing the settings of the sound bar

Follow the procedure below to initialize the sound bar. When the sound bar does not operate properly

for any reason, initialization may solve the problem.

Turn off the sound bar.

Hold down (power) on the front panel of the sound bar for more than 3

seconds.

INPUT

–

VOLUME

Flashes (initialized)

Clearing all learned operations

Hold down LEARN on the supplied remote control for more than 3 seconds to

set the sound bar to the learning mode.

When the sound bar is in the learning mode, the indicators on the front panel ash as shown

below.

Hold down INPUT on the front panel of the sound bar for more than 3 seconds.

INPUT

–

VOLUME

Flashes in red (cleared)

If the clearing is completed, you will hear the bleep sound three times.

Press LEARN or (power) on the supplied remote control.

Controlling the TV via the sound bar

(when the TV’s remote control sensor is blocked)

When the TV Remote Repeater function is enabled, the sound bar receives TV remote control signals

at the TV remote control sensor (on front) and transmits the signals from the TV Remote Repeater (on

rear). This function is useful when you cannot operate your TV from the remote control because the

remote control sensor of the TV is blocked by the sound bar.

NOTE

• This function is available only when your TV remote control uses infrared signals.

TV’s remote control sensor

TV Remote Repeater

TV remote control

Turn on the sound bar.

Hold down REPEATER on the supplied remote control for more than 3 seconds

to enable/disable the TV Remote Repeater function.

Flashes three times (enabled), Flashes once (disabled)

This completes the necessary settings. When the TV Remote Repeater function is enabled, you

can operate your TV from the TV remote control via the sound bar.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YAS-201 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 3,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha YAS-201 Manual

Product: