516966

Yamaha YAS-201 Manual

15
Zoom out
Zoom in
Previous page
1/100
Next page
13
En
Remote control
Problem Cause Remedy
The sound bar cannot
be controlled using
the remote control.
The sound bar is out of the operating
range.
Use the remote control within the operating
range (p.8).
The batteries are weak. Replace with new batteries (p.8).
The remote control sensor of the
sound bar is exposed to direct sunlight
or strong lighting.
Adjust the lighting angle, or reposition the
sound bar.
The TV cannot be
controlled using the
TV remote control.
The remote control sensor of the TV is
blocked by the sound bar.
Use the TV Remote Repeater function (p.11) or
remove the stands of the sound bar so that the
TV remote control sensor is not blocked (p.6).
There may be any problem with the
TV or TV remote control.
Refer to the manuals of the TV.
The TV cannot be
controlled by using
the TV Remote
Repeater function.
The TV Remote Repeater function is
disabled.
Enable the TV Remote Repeater function (p.11).
The TV remote control does not
use infrared signals. (Some remote
controls may not work even if it uses
infrared signals.)
The TV Remote Repeater function cannot be
used in this case. Adjust the position of the
sound bar so that the remote control sensor
of the TV is not blocked by the sound bar and
use the TV remote control to operate the TV.
The sound bar and TV are too close
or too far from one another.
Move the sound bar to adjust the distance
between the TV Remote Repeater and TV
(remote control sensor) (p.11).
If necessary, remove or attach the stands of
the sound bar (p.6).
There is any obstacle (such as cables)
between the sound bar and TV.
Remove the obstacle between the sound bar
and TV.
The sound bar does
not learn TV remote
control operations.
The TV remote control key was not
held down long enough.
Hold down the key for more than 1 second
twice or three times (p.10).
The TV remote control does not
use infrared signals. (Some remote
controls may not work even if it uses
infrared signals.)
The TV remote control learning function
cannot be used in this case. Use the supplied
remote control to operate the sound bar.
The position where you operated the
TV remote control is not appropriate
Operate the TV remote control at the
appropriate position (p.10).
The batteries of the TV remote control
are weak.
Replace with new batteries.
The remote control sensor of the
sound bar is exposed to direct sunlight
or strong lighting.
Adjust the lighting angle, or reposition the
sound bar.
The transmission of the remote control
signal was disturbed by the TV screen
light.
Turn off the TV and perform the learning
operation again (p.10).
Sound is coming
from the TV when the
sound bar volume is
turned up with the TV
remote control.
(when TV remote
control learning
function is used)
Audio output is enabled on the TV. Change the TV setting to disable the TV
speaker output. If a setting to disable the
speaker output is not available on your TV, try
the following methods.
- Connect headphones to the headphone jack
on the TV.
- Set the TV volume to minimum.
The power of the
sound bar and of
the TV switch in the
opposite direction.
(For example, the TV
is turned off if the
sound bar is turned
on.)
(when TV remote
control learning
function is used)
The power of the TV was on when you
performed the learning operation.
Press the power key on the TV and
(power)
on the front panel of the sound bar to turn on
them and then press the power key on the TV
remote control to turn off them.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YAS-201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YAS-201 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info