516966

Yamaha YAS-201 Manual

12
Zoom out
Zoom in
Previous page
1/100
Next page
10
En
Learning has
failed
Twice
Flashes
* Repeat from Step 3-1.
4
Make the sound bar learn the volume (+) operation.
4-1
Press VOLUME (+) on the front panel of the sound bar.
INPUT
–
VOLUME
+
4-2
While pointing your TV remote control at the remote control sensor, hold down the
volume (+) key for more than 1 second twice or three times.
Result Bleep/buzzer Indicators
Successfully
learned
Once
Lights up
Learning has
failed
Twice
Flashes
* Repeat from Step 4-1.
5
Make the sound bar learn the power operation.
5-1
Press (power) on the front panel of the sound bar.
INPUT
–
VOLUME
+
5-2
While pointing your TV remote control at the remote control sensor, hold down the
power key for more than 1 second twice or three times.
Result Bleep/buzzer Indicators
Successfully
learned
Once
Lights up
Learning has
failed
Twice
Flashes
* Repeat from Step 5-1.
6
To nish the learning mode, press LEARN or (power) on the supplied remote
control.
This completes the necessary settings. Now you can operate the sound bar with the TV remote
control’s power key or volume keys.
HINT
• The learning mode will be nished automatically if no operations are performed for 5 minutes.
• Set the TV volume to minimum. When you turn up the volume of the sound bar with the TV remote control, the
volume of the TV may be turned up at the same time. In this case, follow Step 3 in “Connections” (p.7) to change the
TV setting.
Settings
Controlling the sound bar with TV remote control
(TV remote control learning function)
You can use the TV remote control to turn on/off the sound bar or adjust its volume by having the
sound bar learn the TV remote control signals.
NOTE
• This function is available only when your TV remote control uses infrared signals.
• Depending on the installation conditions or settings of the sound bar, both the sound bar and TV will receive the TV
remote control signals and operate simultaneously.
1
Turn off the TV and sound bar.
2
Hold down LEARN on the supplied remote control for more than 3 seconds to
set the sound bar to the learning mode.
When the sound bar is in the learning mode, the indicators on the front panel ash as shown
below.
3
Make the sound bar learn the volume (–) operation.
3-1
Press VOLUME (–) on the front panel of the sound bar.
INPUT
–
VOLUME
+
3-2
While pointing your TV remote control at the remote control sensor, hold down the
volume (–) key for more than 1 second twice or three times.
INPUT
–
VOLUME
+
TV BD/DVD YIT SURROUND CLEAR VOICE UNIVOLUME DTS
D
SUBWOOFER
PL
VOLVOL VOLVOLVOLVOL VOLVOL
Approx. 30 cm (1 ft)
TV remote control
Hold down
(more than 1 second)
Release
(more than 1 second)
Hold down
(more than 1 second)
Release
(more than 1 second)
Result Bleep/buzzer Indicators
Successfully
learned
Once
Lights up
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YAS-201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YAS-201 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info