689861
298
Zoom out
Zoom in
Previous page
1/363
Next page
Chapter 7 Part A Frame and bodywork (XV535 models) 7A-5
9.2a Remove the mounting
bolts (arrows). . .
9.2b ... and pull the hoses (if equipped)
off the fittings on the back side of
the bracket
9.3a Remove the mounting bolt at the
upper rear ...
9.3b ... and at the lower front
10.1a Remove the backrest mounting
bolts on each side ...
10.1b ... don't lose the washer
and spacers
10.2a Remove the mounting bolt at the rear on each side ...
10.2b ... these thread into special nuts that fit inside the
frame tubes
rear from the slot and the tab at the front from the grommet.
2 To remove either of the front side covers, remove the screws
around the edge of the cover and lift it off. To remove the left mounting
bracket, undo its bolts (see illustration). Disconnect the carburetor
hoses from the back side of the bracket (if equipped). Take the bracket
off, complete with the air induction system components (if equipped)
(see illustration).
3 To remove the right bracket, disconnect the electrical connectors
from the components mounted on it. Undo the mounting bolts and
take the bracket off (see illustrations).
4 Installation is the reverse of the removal steps.
10 Backrest and shock absorber cover - removal and
installation
Refer to illustrations 10.1a, 10.1b, 10.2a, 10.2b and 10.3
1 If you're working on a model with a backrest, lift the seat and
remove the forward mounting screw on each side, then remove the
washer and spacers (see illustrations).
2 Remove the Allen bolt and special nut at the rear of the backrest
on each side and detach it from the motorcycle (see illustrations).
298


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha XV920 Virago at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha XV920 Virago in the language / languages: English as an attachment in your email.

The manual is 52,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info