689861
297
Zoom out
Zoom in
Previous page
1/363
Next page
7A-4
Chapter 7 Part A Frame and bodywork (XV535 models)
7.1 Remove one of the mounting bolts . . .
7.2a ... pull out the clip, remove the
washer and separate the support from
its bracket...
7.2b ... then remove the other mounting
bolt to detach the seat
7.4 Lift the passenger seat off...
7.5 ... and remove the mounting bolts to
detach the rider's seat
8.2 Remove the front mounting bolt on
each side and detach the rear of the top
cover from the bike
9.1 Remove the bolt from the mounting tab (arrow), then
disengage the cover tabs from the slot and grommet
7 Seat - removal and installation
Single seat
Refer to illustrations 7.1, 7.2a and 7.2b
1 Unlock and lift the seat and remove one of the mounting bolts
(see illustration).
2 Remove the clip, washer and clevis pin, then remove the
remaining mounting bolt (see illustrations).
3 Installation is the reverse of the removal steps.
Dual seat
Refer to illustrations 7.4 and 7.5
4 Unlock the passenger seat and lift it off the motorcycle (see
illustration).
5 Unbolt the rider's seat (there's one bolt on each side at the rear)
(see illustration). Disengage it from the hole in the frame and lift it off
6 Installation is the reverse of the removal steps. Engage the tab
front of the rider's seat with the hole in the frame.
8 Top cover - removal and installation
Refer to illustration 8.2
1 A top cover is used on models that don't have an upper fuel tank.
2 To remove the cover, lift the seat. Undo one mounting bolt on
each side at the front (see illustration). Slide the cover backwards to
unhook it from the frame and lift it off.
3 Installation is the reverse of the removal steps. Be sure the
mounting collars and grommets are in place on the front mountings
and that the rear mounting peg engages the grommet.
9 Side covers - removal and installation
Refer to illustrations 9.1, 9.2a, 9.2b, 9.3a and 9.3b
1 To remove a rear side cover, lift or remove the seat and undo the
mounting bolt at the top (see illustration). Disengage the tab at the
297


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha XV920 Virago at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha XV920 Virago in the language / languages: English as an attachment in your email.

The manual is 52,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info