669113
69
Zoom out
Zoom in
Previous page
1/94
Next page
67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
VRepeat as Necessary .............................................................................................................................
Repeat the above procedure to record the remaining SAMPLE PADS, as
required.
NOTES
• The PSR-2700 has 1,020 kilobytes (1.02 megabytes) of waveform
RAM memory for sampled voice storage. To find out how much of this
memory is available for recording press the [CLEAR] button: “XXXX
KByteFree” will appear on the display (“XXXX” indicates the remaining
RAM in kilobytes).
• The sample data is retained in memory even when the power switch is
turned off as long as the backup batteries are installed or the AC plug
is connected.
Enter an Original Voice Name
The PSR-2700 automatically creates a voice name for each sampled
voice. If you want to enter a more descriptive name for easier identification
(and this is recommended), this can be done via the keyboard after pressing
the DIGITAL SAMPLING section [VOICE NAME] button so that its indi-
cator lights. A voice name can consist of up to eight characters. Each key on
the keyboard enters a different character, listed immediately below the key.
The lowest key (C1) functions as a shift key that shifts between lower- and
upper-case characters: hold the SHIFT key while pressing a character key
to enter the upper-case character. Each time a character is entered the cursor
moves to the next character position. The F5 and F#5 keys move the cursor
backward and forward within the voice name. Use these keys to place the
cursor where you want to enter or change a character. The DELETE key
(G5) deletes the character at the cursor position. Press the ENTER key
(C6) when you’ve finished entering the voice name — this returns you to
the voice number display (your voice name will not be entered if you don’t
press the ENTER key).
NOTES
• Playing the keyboard will produce no sound during voice name entry.
• No name can be entered for a voice that contains no data.
SAMPLE PADS
1 2 3 4
VOICE #
VOICE
NAME
MNOPQRSTUVWXYZ012345678
08:Showtune 001:GrandPno
AccOff SVC=001:H–ello!
The recorded samples can be played simply by pressing the appropriate
SAMPLE PAD. The sample sounds only as long as the pad is held, so you
play only a section of a sample by releasing the pad early, or rapidly
retrigger the first section of the sample by repeatedly pressing the pad. The
pads can also be played at the same time so you can play all four samples
simultaneously, as required.
To select a different sample voice for playback via the pads, then press
the DIGITAL SAMPLING section [VOICE #] button and use the [+] and
[–] buttons, the number buttons, the data dial, or the [VOICE #] button
itself to select the desired sample voice number.
NOTES
• Different voices can be selected for playback via the pads and key-
board (see page 70), and these can be played simultaneously via the
pads and keyboard.
• To use sample pad data from disk, load the data into the PSR-2700
as described on page 60.
Playing the Sample Pads
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-1700 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info