The following functions provide a range of useful sample editing capabilities.
NOTES
• If the sample data cannot be edited the following messages will ap-
pear on the LCD display: “No Wave Data” if there is no data in the
pad; “Protected Voice” is the data is protected and cannot be edited
by the PSR-2700.
Press the [PITCH] button or any other function button — the
[VOICE#] button, for example — to exit from the pitch function.
ZHold [CLEAR] and Select the Voice Or a Pad......................................................................................
While holding the [CLEAR] button press the [VOICE #] button if you
want to clear the entire voice, or the SAMPLE PAD you want to clear if
you only want to clear one pad. The [CLEAR] button, pad indicator if a
pad was selected, and ARE YOU SURE? indicators will flash and the “Are
you sure?” prompt will also sound.
VOICE #
CLEAR
2
or
The contents of an entire sampled voice (four pads) or individual SAMPLE PADS can be completely cleared
(erased) as follows:
XClear the Voice or Pad...........................................................................................................................
Press the [YES] button to clear the current sample voice or selected
pad, or the [NO] button to cancel the clear operation.
NOTES
• In some cases “SQUEEZING XXX%” will appear on the display while
the PSR-2700 processes the sampled data during the clear process.
“XXXXKByteFree” will then appear, indicating the amount of RAM
remaining after the data has been processed.
• When a sample pad is cleared, the mapping applied to that pad is also
cleared and the default mapping will be restored.
ARE YOU SURE ?
YESNO
●Clearing Samples
ZHold [PITCH] and Select a Pad..............................................................................................................
While holding the [PITCH] button press the SAMPLE PAD containing
the sample you want to tune. The selected SAMPLE PAD indicator will
flash and its current pitch value will appear on the LCD display.
SAMPLE PADS
1234
PITCH
The pitch of each SAMPLE PAD can be adjusted over approximately a ±50-cent range (100 cents total —
approximately one semitone). This is a convenient way to tune samples to match the music in which they will be
used.
●Tuning the Samples
XSelect the Pitch.......................................................................................................................................
Use the [+] and [–] buttons, the number buttons, or the data dial to set
the pitch as required. The pitch range is from “–10” through “0” to “+10”. A
setting of “0” produces normal pitch. Each increment raises (+) or lowers (–
) the pitch by approximately 5 cents. You can play the pads while tuning to
check the sound.
The normal tuning value can be recalled instantly by pressing the [+]
and [–] buttons at the same time.
021
–+
RESET
08:Showtune001:Sampl001
AccOffPitchPAD2=0–0
If you press only the [PITCH] button SAMPLE PAD 1 will automati-
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha PSR-1700 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha PSR-1700 in the language / languages: English as an attachment in your email.
The manual is 1,96 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
