669113
68
Zoom out
Zoom in
Previous page
1/94
Next page
66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
PSR-2700 Digital Sampling
Recording
NOTES
• Although a maximum of 255 individual samples can be recorded,
the samples have to be extremely short — a fraction of a second
each — to achieve this number. During normal sample recording the
sample memory is likely to become full long before the maximum of
255 samples is reached. The maximum total recording time — 60
seconds — is a more reliable guide as to how much of the sample
memory has been used or is available.
Each sampled “voice” recorded by the PSR-2700 can contain four separate samples, one in each SAMPLE
PAD. You can play the individual samples included in the selected sample voice by playing the appropriate pad,
or by playing on the keyboard when the VOICE section SAMPLED VOICE indicator is lit. When you play a
sampled voice via the keyboard, the four separate samples it contains are assigned to different ranges of the key-
board. This will be explained in more detail in the “Playing Samples via the Keyboard” section on page 70.
Your sampled voices will be retained in the PSR-2700 sample memory even when the power is turned off as
long as the backup batteries are installed on the AC plug is connected. Your samples can also be saved to and
loaded from disk so you can create and original sample library.
ZSelect a Sample Voice Number .............................................................................................................
Press the DIGITAL SAMPLING section [VOICE #] button. The cur-
rent selected sample voice number will appear on the LCD display panel.
Use the [+] and [–] buttons, the number buttons, the data dial, or the
[VOICE #] button itself to select the desired sample voice number. If the
selected voice number contains no data, “********” will appear on the
display in place of the voice name.
VOICE #
08:Showtune 001:GrandPno
AccOff SVC=0–01:********
Press the SAMPLE PAD to which you want to record while holding
the DIGITAL SAMPLING section [REC] button. “Sampling Ready” will
appear on the display. Recording will begin immediately if you set the
trigger level to “OFF” (see “Setting the Trigger Level, above). If you se-
lected automatic triggering, the [REC] button and selected SAMPLE PAD
will flash until recording is triggered by an input signal. When recording
starts, whether manual or triggered, the [REC] button indicator will light
continuously and “Sampling” will appear on the display.
NOTES
• The keyboard and other function buttons will not operate during
sample recording.
• If the “No Bank” or “Wave Ram Full” error message appears, there
is not enough memory available for sampling and some data will
have to be cleared before sampling will be possible (See “Error
Messages” on page 81).
SAMPLE PADS
REC
1 2 3 4
SVC=001 Frq=LOW Trg=3
>>>> Sampling !!!!! <<<<
Press the SAMPLE PAD to which you are recording to stop recording.
Both the [REC] button and SAMPLE PAD indicators will go out.
NOTES
• Try to stop record immediately after the sound has finished in order
to conserve sample memory and allow maximum total recording
time.
• If the maximum sampling time is exceeded, “Sampling End” will
appear on the display and recording will stop automatically.
• In some cases “SQUEEZING XXX%” will appear on the display
while the PSR-2700 processes the sampled data after recording.
“XXXKByteFree” will then appear, indicating the amount of RAM
remaining after the data has been processed.
SAMPLE PADS
1 2 3 4
XRecord .....................................................................................................................................................
CStop Recording.......................................................................................................................................
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-1700 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info