669113
67
Zoom out
Zoom in
Previous page
1/94
Next page
65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Setting the Trigger Level
There are two ways to start sample recording: manual and triggered. With manual recording recording starts
the moment you press the [REC] and pad buttons, as described in the “Recording” section, below. With trig-
gered recording you initially engage the record standby mode and recording actually begins as soon as the PSR-
2700 detects an input signal that is higher than the selected trigger level. The [TRIGGER LEVEL] button lets
you select the method you want to use, and provides 5 different trigger levels. The trigger level you choose will
depend on the type of signal you want to record and the level of the background noise where you record. The
idea is to set the highest trigger level that will start recording without cutting off the attack of the sound you are
recording. If the trigger level is too low, recording can be triggered by ambient background noise at the wrong
time.
ZPress the [TRIGGER LEVEL] Button ....................................................................................................
Press the DIGITAL SAMPLING section [TRIGGER LEVEL] button.
The current trigger level setting will appear on the LCD display panel.
08:Showtune 001:GrandPno
AccOff Trig.Level=3
TRIGGER
LEVEL
XSelect a Trigger Level ............................................................................................................................
Use the [+] and [–] buttons, the number buttons, the data dial, or the
[TRIGGER LEVEL] button itself to select the desired trigger level setting
(“OFF” or “1” through “5”).
When the trigger level is set to “OFF”, manual recording is selected and
recording will start immediately when the [REC] and pad buttons are
pressed (see the “Recording” section, below). Automatic triggering is se-
lected when a value from 1 to 5 is selected. “1” produces the lowest trigger-
ing level, triggering recording when even a very soft sound is detected at
the input. Increasing values produce progressively higher trigger levels. Try
a trigger level of 2 or 3 to begin with. The default setting of “3” can be in-
stantly selected by pressing the [+] and [–] buttons simultaneously.
NOTES
• Proper trigger operation depends on proper input level adjustment.
Make sure you set the input level properly as described on page 63.
• The trigger level is set to “3” when the PSR-2700 power is initially
turned on.
021
–+
RESET
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha PSR-1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha PSR-1700 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info