516892
54
Zoom out
Zoom in
Previous page
1/68
Next page
Troubleshooting
54 CP5/CP50 Owner’s Manual
Appendix
The output from the stage piano sounds distorted.
Ensure that the volume is not too high.
Check the input levels of any mixer or amplifier connected to your CP5 or CP50. If lowering the input gain or pressing
the corresponding pad button does not remove the distortion, try lowering the stage piano's output volume.
Ensure that the Pre-Amplifier blocks, the Modulation Effect blocks, and the Power-Amplifier /
Compressor blocks (CP5 only) are set appropriately.
Certain combinations of settings can produce distortion.
Sound output is intermittent and stuttered.
If the total number of notes being played by all parts is too high, the stage piano’s output may
become intermittent and stuttered.
Unexpected pitches are produced.
Ensure that transpose and tuning parameters are set to 0.
Ensure that note shift and detune parameters for the left and right parts are set to 0.
A Pre-Amplifier, Modulation Effect, or Power-Amplifier / Compressor*
block or the Reverb block has no effect on the final sound. (*: CP5 only)
Ensure that the [PRE-AMP], [MOD-FX], [PWR-AMP] (CP5 only), and [REVERB] buttons are turned
on as required.
If a Block button is turned off (i.e., if the lamp to its top-left is not lit), its respective block will also be off and will not
affect the sound in any way. To remedy this situation, press the Block button and confirm that its lamp lights up.
In cases where a Pre-Amplifier block seems to be having no effect on the sound, ensure that a
voice from the PIANO or E.PIANO category has been assigned to the part in question.
Voices from other categories are not affected in any way by this block.
In cases where a Modulation Effect block seems to be having no effect on the sound, ensure that its
parameters have been set appropriately.
Press and hold (for at least one second) the [PRE-AMP], [MOD-FX], and [PWR-AMP]* buttons. (See the Reference Manual pdf
document for more details.) (*: CP5 only)
Press the [TRANSPOSE] button Turn Knob 1 to set the Transpose parameter.
Press the [UTILITY] button Jump to Page 1 by pressing the [1] button Turn Knob 1 to set the MasterTune parameter.
Press and hold (for at least one second) the Part button for each of the left and right parts Jump to Page 2 by pressing the [2]
button Turn Knobs 1 and 2 to set the NoteSht and Detune parameters.
Press and hold the [MOD-FX] button (for at least one second). (See the Reference Manual pdf document for more details.)
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP5 in the language / languages: English as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP5

Yamaha CP5 User Manual - German - 68 pages

Yamaha CP5 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info