516892
52
Zoom out
Zoom in
Previous page
1/68
Next page
Exchanging Files with USB Flash-Memory Devices
52 CP5/CP50 Owner’s Manual
Quick Start Guide
Exchanging Files with USB Flash-Memory Devices
When a USB flash-memory device is plugged into your CP5 or CP50, you can use it to save the entire contents of User
Memory and to load previously-saved Performances back into the stage piano. Furthermore, you can also create
directories on memory devices and carry out various other file management operations such as renaming and deleting.
As described below, each of these operations can be carried out from the File screen. (See the Reference Manual pdf
document for more details.)
1Plug a USB flash-memory device into the stage piano’s USB TO DEVICE port.
2Press the [FILE] button.
The File screen will be displayed.
3Use the [L PAGE] and [PAGE R] buttons to switch between this screen’s pages, and press the knob corresponding
to the operation you wish to perform.
The screen for the selected operation will be displayed.
4Set parameters as required using Knobs 1 to 3 and the [ENTER] button.
For more details regarding file operations, refer to the Reference Manual pdf document.
5When you have performed all of the required operations in the File screen, press the [EXIT] button.
The Performance screen will be displayed.
Restoring Initial Settings
The following procedure describes how to use the Factory Set function to restore User Memory to its initial condition.
NOTICE
Whenever the Factory Set function is used to restore initial settings, all Performance data, all User Songs, and system settings within User
Memory will be reset to the default condition. Care should, therefore, be taken to avoid overwriting irreplaceable data. Furthermore, it is wise
to regularly create backup copies of important Performance data and system settings on a USB flash-memory device, computer, or the like.
1Navigate to Page 13 (C) of the Utility screen by pressing the [UTILITY] button, and if necessary, the [C] button.
2Press Knob 2 (FactSet [PUSH]).
You will be asked to confirm that you wish to proceed.
3Press Knob 1 (YES [PUSH]) or the [ENTER] button to restore the stage piano’s initial settings.
When the data has been restored, the message “Completed.” will be displayed, followed by the Utility screen. If you
do not wish to proceed, press either Knob 2 (NO [PUSH]) or the [EXIT] button.
NOTICE
You should never turn off your CP5 or CP50 while the message “Please keep power on...” is displayed on-screen. If this precaution
is not observed, the content of User Memory may be lost and system data may become corrupted, preventing your CP5 or CP50
from operating normally the next time it is turned on.
HINT
Setting a File for Automatic Loading
In order that you can quickly resume an editing session, it may be convenient to have your CP5 or CP50 automatically load a
specific backup file whenever you turn it on. The correct way to setup this function is as follows.
1Save the “All” file to be automatically loaded with the following name in the root directory of a USB flash-memory device.
File type File name
All CP5 AUTOLOAD.C5A
CP50 AUTOLOAD.C6A
2Press the [UTILITY] button to open the Utility screen, and if necessary, press the [A] button to jump to Page 11 (A).
3Turn Knob 2 to set the AutoLoad parameter to “on”, and then press the [STORE] button to store your setting.
4Restart your CP5 or CP50.
The “All” file that you saved on the USB flash-memory device in Step 1 will be automatically loaded.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP5 in the language / languages: English as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP5

Yamaha CP5 User Manual - German - 68 pages

Yamaha CP5 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info