516892
53
Zoom out
Zoom in
Previous page
1/68
Next page
Troubleshooting
CP5/CP50 Owner’s Manual 53
Appendix
Appendix
Troubleshooting
If you should experience difficulties with your CP5 or CP50, such as an inability to produce any sound or the output
becoming distorted, work through the following checklists in order to rectify the situation. Alternatively, the Factory Set
function (page 51) can also be used to resolve problems after first creating a complete backup of the stage piano’s data
on an external device (page 52). If any specific problem should persist, however, please contact a Yamaha
representative or authorized distributor (see the back of this booklet).
The stage piano produces no sound.
Ensure that a stereo system, an amplifier and speakers, or headphones have been connected to
your CP5 or CP50.
This stage piano does not come with built-in speakers. In order to hear the sounds that it produces, therefore, you will
need to connect headphones or an external amplifier and speakers (page 15).
Ensure that the stage piano and the connected audio equipment are turned on.
Ensure that the master volume on your CP5 or CP50 and on the connected audio equipment are not
set to an excessively low level.
If a foot controller has been connected to the stage piano, try using it to increase the volume.
Ensure that MIDI volume or expression has not been set excessively low by an external MIDI
controller.
Ensure that your CP5 or CP50 has been correctly connected to the external audio equipment (such
as an amplifier and speakers).
Ensure that local control has not been turned off.
If local control is turned off and your CP5 or CP50 is not being used together with a computer or another device
returning MIDI messages, it will not be possible to produce any sound from the internal tone generator by playing the
keyboard.
Ensure that no part volumes have been set to an excessively low level.
Ensure that Part buttons are not turned off.
If a Part button is turned off (i.e., if the lamp to its top-left is not lit), the part in question will not produce any sound. To
remedy this situation, press the Part button and confirm that its lamp lights up.
Ensure that the output volumes for the Pre-Amplifier blocks and the Power-Amplifier / Compressor
blocks (CP5 only) are not fully turned down.
Each Pre-Amplifier block (voices from E.PIANO category only):
Each Power-Amplifier / Compressor block (CP5 only)
Press the [UTILITY] button Jump to Page 5 by pressing the [5] button Turn Knob 3 to set LocalSw to “on” Press the [STORE]
button to store this setting (page 48).
Press and hold the [PRE-AMP] button (for at least one second) Jump to Page 4 by pressing the [4] button Turn Knob 2 to set the
Volume parameter to an appropriate level. (See the Reference Manual pdf document for more details.)
Press and hold the [PWR-AMP] button (for at least one second) Set the volume to an appropriate level. (See the Reference
Manual pdf document for more details.)
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha CP5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha CP5 in the language / languages: English as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha CP5

Yamaha CP5 User Manual - German - 68 pages

Yamaha CP5 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info