36011

Yaesu FT-2800 Manual

35
Zoom out
Zoom in
Previous page
1/60
Next page
33FT-2800M OPERATING MANUAL
MEMORY OPERATION
HOME CHANNEL MEMORY
A Convenient one-touch “Home” channel memory is available to simplify return to your
most-often-used frequency. This memory does not appear in the regular memory bank, to
simplify operation and speed recall of this important channel.
To recall the Home channel, just press the
[
D/
MR
(
MW
)]
key, repeatedly if necessary, until the “HM”
icon appears on the display; this indicates that the Home
Channel has been recalled.
The factory default frequency for the Home channel is
146.520 MHz (USA version, EXP version: 144.000
MHz). You can re-program the Home channel in a man-
ner identical to that used for the regular memories:
1. From the VFO mode, tune in the frequency you wish
to store, and set all repeater shifts and other data just the way you do for “normal”
memory channel storage.
2. Press and hold in the
[
D/MR
(
MW
)]
key for one second, then press the
[
REV
(
DW
)]
key
to store the displayed data into the Home channel. The memory label will disappear
(since you are still operating in the VFO mode).
You may also append an alpha-numeric “Tag” (label) to a Home channel, as described pre-
viously. be sure to recall the Home channel first, then enter the Menu (selection “00 ALPH”)
to program the label’s contents.
From the Home channel, you may tune off (as in the Memory Tune mode) with-
out doing anything more than rotating the main DIAL knob. This automatically
shifts control to the VFO, making it a good idea to program in your area’s “Calling
Frequency” as the Home channel. Once contact is established, you may then tune off the
Calling Frequency to an open simplex frequency to carry on your QSO.
MEMORY-ONLY MODE
Once memory channel programming has been completed, you may place the radio in a
“Memory Only” mode, whereby VFO and Home Channel operation are impossible. This
may be particularly useful during public-service events where a number of operators may be
using the radio for first time, and ultimate simplicity of channel selection is desired.
To place the radio into the Memory Only mode, turn it off. Now press and hold in the
[
MHz
(
SET
)]
and
[
D/MR
(
MW
)]
keys while turning the radio on. The VFO and Home Channel
will now be disabled.
To return to normal operation, repeat the above power-on procedure.
USA version
EXP version
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2800 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info