36011

Yaesu FT-2800 Manual

33
Zoom out
Zoom in
Previous page
1/60
Next page
31FT-2800M OPERATING MANUAL
MEMORY OPERATION
MEMORY RECALL
Once you have stored the memory or memories desired, you must now switch from the
“VFO” mode to the “Memory Recall” mode, so you can operate on the just-stored memory
channels.
1. Press the
[
D/MR
(
MW
)]
key, repeatedly if necessary, until the “MR” icon and a memory
channel number appear on the display; this indi-
cates that the “Memory Recall” mode is now en-
gaged.
2. When more than one memory has been stored, use
the DIAL knob to select any pf the programmed memories for operation. Alternatively,
the microphone’s
[
UP
]
or
[
DWN
]
button may be used to step or scan through the avail-
able memories. When using the microphone’s buttons, press the button momentarily to
move one step up or down; press and hold in the
[
UP
]
or
[
DWN
]
button for one second
to begin memory scanning.
Memory Recall from the Microphone’s Keypad:
While operating in the Memory Recall mode, the keypad of the MH-48A6J Microphone may
be used for direct recall of memory channels.
To do this, press the Channel Number you wish to recall, then press the
[
Û
]
key. For ex-
ample, to recall Memory Channel “5,” press
[
5
]
à
[
Û
]
. To recall Memory Channel “118,”
press
[
1
]
à
[
1
]
à
[
8
]
à
[
Û
]
.
Labeling Memories
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid in
recollection of the channel’s use (such as club name, etc.). This is easily accomplished using
the Set (Menu) mode.
1. Recall the memory channel on which you wish to append a label.
2. Press and hold in the
[
MHz
(
SET
)]
key for one second, then rotate the DIAL knob to
select “00 ALPH.”
3. Press the
[
MHz
(
SET
)]
key. You will notice the first character location blinking, indicat-
ing that you are now in the Alpha-Numeric (“A/N”) entry mode. Within the A/N entry
mode, rotate the DIAL knob to select characters; pressing the
[
REV
(
DW
)]
key will
move the character’s entry location to the right.
4. Rotate the DIAL knob to select the desired number, letter, or symbol, then press the
[
D/
MR
(
MW
)]
key to move the next character’s location. Move two slots if you want to put
in a space.
5. Repeat step 4, as necessary, to complete the name tag (up to six characters) for your
memory, then press the
[
MHz
(
SET
)]
key momentarily to save the A/N name just entered.
6. Press and hold in the
[
MHz
(
SET
)]
key for one second to exit to normal operation.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2800 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info