36011

Yaesu FT-2800 Manual

34
Zoom out
Zoom in
Previous page
1/60
Next page
32 FT-2800M OPERATING MANUAL
While operating in the Memory Recall mode, press and hold in the
[
LOW
(
A/N
)]
key for one
second to toggle the display between indication of the frequency and the channel’s Alpha/
Numeric label.
Memory Tuning
Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the VFO mode.
1. With the FT-2800M in the Memory Recall mode, select the desired memory channel.
2. Press the
[
MHz
(
SET
)]
key momentarily. The “MR” indicator will blink; this indicates
that the “Memory Tuning” mode has been engaged.
3. Rotate the DIAL knob, or press the
[
UP
]
or
[
DWN
]
keys, to tune to a new frequency. The
synthesizer steps you have selected for “VFO” operation will be the steps used during
Memory Tuning.
4. If you wish to return to the original memory frequency, press the
[
D/MR
(
MW
)]
key
momentarily. The “MR” indicator will stop blinking.
5. If you wish to store into memory a new frequency set during Memory Tuning, just press
and hold in the
[
D/MR
(
MW
)]
key for one second, then complete the normal memory
storage procedure. Be sure to select an open memory channel when doing so.
Deleting Memories
With 221 total memories available, there frequently are situations where you may desire to
delete certain memories temporarily (except the Memory Channel “00” and Home Chan-
nel). The procedure for deleting a channel is quite simple:
1. With the FT-2800M in the Memory Recall mode, press and hold in the
[
D/MR
(
MW
)]
key for one second, then rotate the DIAL knob to select the memory channel you wish to
delete.
2. Press the
[
LOW
(
A/N
)]
key momentarily. The “CLEAR” notation will appear on the dis-
play.
3. Press again the
[
LOW
(
A/N
)]
key momentarily. The previously-selected memory will be
deleted.
Once deleted, channel data cannot be recovered!
MEMORY RECALL
MEMORY OPERATION
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2800 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info