527017

Xenteq EBC-AT SERIE Manual

12
Zoom out
Zoom in
Previous page
1/26
Next page
12
English
INST AL L AT IO N
The atmosphere
The inverter must be mounted in a space that complies with the following:
- Leave enough space on all sides of the charger (min. 10 cm) for air circulation. In
addition, make sure that there are ventilation vents.
- The ambient temperature must be between 0ºC and 40ºC. The optimum temperature
is between 15ºC and 25ºC.
- Mount the charger in a dry place where there is no chance of it being affected by
moisture or dirt.
- Keep the charger out of the reach of children.
- Do not use the charger in places where gases are released or flammable materials are
stored.
- It is normal that the housing is warm during charging.
- The EBC charger may not be used outdoors.
Important
do not charge when there is a fuel leak or fuel is evaporating.
when the charger is to be used in an aluminium or steel ship/vessel, it must be
insulated by suspension. That is, in order to avoid electrolysis, the casing of the
charger may not be in contact with the ship.
Connection
One cable set is delivered with the EBC charger. Extra cables can be mounted when more
batteries are charged.
1. Mount the red cable(s) on the ‘+’ output(s) of the charger. The black cable can be
mounted in the same way on the ‘-‘ output of the charger.
2. Connect the other sides of the cables on the poles of the battery. Red on the plus
pole and black on the (joined) minus.
If you want to connect own cables, the below formula should be followed:
Max. charge current x distance x 0,2 = required whire thickness
3. After the battery has been connected to the charger the power plug can be put into a
socket outlet and the on/off switch can be turned in the ‘on’ position. The charging
process will begin.
When disconnecting the charger, the charger must be turned off and the power plug
must be removed from the outlet.
Black cable to (joined)
minus of
battery/batteries
Red cable(s) to plus(es) of
battery/batteries.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xenteq EBC-AT SERIE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq EBC-AT SERIE in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info