527017

Xenteq EBC-AT SERIE Manual

10
Zoom out
Zoom in
Previous page
1/26
Next page
10
English
TH E CHA R GIN G PR OCE SS
The charging process consists of 3 phases. The length of the charging time depends on
the battery quality, battery capacity, dept of discharge and any present users.
Bulk charging
The charging current is 100% and the voltage increases until the set voltage is reached.
The charger always starts in this stage for a minium of 30 minutes.
Absorption charging
The charging current is at most 100%, but because the battery is filling up the charging
current decreases. The charging voltage is kept on the set value. If the charging current
is less then 25% the charger will switch to the last fase.
Float charging
The battery is full and will be maintained with a lower, firm voltage (set value). The
delivered current is low. If the requested current is more than 100% of the maxium
charge current, the charger will switch back to the main charging phase.
Important
If you want to remove the charger from the battery, it’s important that the charging
process is always completely finished. As such, the connection between the charger
and the battery should only be broken when the green LED ‘float’ lights. If the
charging process is interrupted before it is completed, the battery can become
damaged.
When disconnecting the battery, at interruption of the mains voltage or when the charger
is turned off, the current charging process will stop. When a battery is re-connected, the
mains voltage is present again or when the charger is turned on again, in all cases a new
charging process will start.
VOL T AGE SE T T ING S
Charging voltages
The EBC has different charging voltages because each battery type needs other voltages
to ensure the longest duration of life. Therefore, the right charging voltages need to be
set beforehand by means of switches.
Disconnect the charger from the mains. On the front panel of the charger you will find six
switches. The charging voltages can be set by means of the first five switches. The sixth
switch should be in the OFF position. The schedule bellow is a good directive, however
always consult the technical details of your battery or your battery supplier. The charge
voltages for each setting can be found on page 24.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xenteq EBC-AT SERIE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xenteq EBC-AT SERIE in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info