724656
13
Zoom out
Zoom in
Previous page
1/16
Next page
12v Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL No.: LCD699-2SC • 11/2017 • 54731
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
12v Lithium-ion Cordless Drill with Hammer Action
MODEL No.: LCD699-2SC • 11/2017 • 54731
22 23
Side Belt Clip
1. The side belt clip (5) is used to assist to clip the
tool to your waist belt while working. Install the
clip by inserting into the side belt clip recess
(13), until the securing tab on the side belt clip
engages in the recess. A click will be heard to
indicate it is secure in position (Fig J).
2. To remove the side belt clip (5), push down on
the securing tab on the clip using your thumb,
while at the same time pulling the clip away
from the drill until the clip releases (Fig K).
Cleaning
Clean the case only with a damp cloth. DO NOT
use solvents when cleaning plastic parts. Plastics
are susceptible to damage from various types of
commercial solvents and may be damaged by
their use. Use a clean cloth to remove dirt, dust,
oil, grease etc, then dry well.
Maintenance
To maintain capacity, recharge the battery every two months. Store only
fully charged batteries.
They should therefore be recharged from time to time. The place of storage
must be dry; the ambient temperature must not fall below 0°C or rise above
40°C.
CAUTION! Electrical and battery operated units that no longer work
should not be disposed of in the household waste! They are to be collected
separately, in accordance with your local waste disposal regulations.
ATTENTION! Batteries must be removed from battery powered tools
and disposed of separately in accordance with relevant waste battery
regulations.
Batteries must never be disposed of with domestic waste!
Please discard power tools no longer usable at a local collection point.
Collection and disposal of packaging materials separately by types
complying with local rules and regulations. For details, please contact
your local council.
J.
K.
Warranty
Your new Workzone® Titanium 12V Lithium-Ion Cordless Drill will more than
satisfy your expectations.
It has been manufactured under stringent Workzone® Quality Standards to
meet superior performance criteria.
You will nd your new 12V Lithium-Ion Cordless Drill easy and safe to
operate, and, with proper care, it will give you many years of dependable
service.
CAUTION. Carefully read through this entire instruction manual before
using your new Workzone® Titanium 12V Lithium-Ion Cordless Drill.
Take special care to heed the Cautions and Warnings.
Your Workzone® Titanium 12V Lithium-Ion Cordless Drill has many
features that will make your job faster and easier. Safety, performance, and
dependability have been given top priority in the development of this 12V
Lithium-Ion Cordless Drill, making it easy to maintain and operate.
Use only Workzone® Titanium replacement parts for your product.
Non-conforming parts or modications made to parts will void your
warranty.
Environmental protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, hoses and packaging should be sorted, taken to the local
recycling centre and disposed of in an environmentally safe way.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone LCD699-2SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone LCD699-2SC in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info