724617
20
Zoom out
Zoom in
Previous page
1/32
Next page
16V Lithium-ion Cordless Drill
AFTER SALES SUPPORT
(toll free)MODEL No.: CDT214XA • 05/2019 • 1956
e-mail: info.aldi@positecgroup.com
AUS
18
1300 889 028
AUS
Forward/reverse switch
NOTE: You can only change the direction of rotation of the drill/driver using the
forward/reverse switch (5) when the trigger (7) is NOT depressed.
This switch will allow you to change the direction of the motor while the trigger
switch is not depressed.
Drill/driving uses the forward mode. The reverse mode is intended for the removal of
screws and assisting to remove jammed drill/driver bits.
When the forward/reverse switch (5) is in the middle position, the drill is in the lock
position and will not function.
Adjustable torque
This drill/driver is equipped with 21 torque settings plus 1 x drill setting.
The torque settings are controlled and adjusted by the torque setting collar (2).
When using the drill/driver for drilling
1. When using the drilling function the torque control has
no eect to the output of the drill.
The drill function is used when using the drill to
drill holes in metal, non ferrous material, wood, plastic
and similar materials.
Rotate the function selection collar so the symbol
of the drill bit aligns with the triangular indicator on
the top of the drill housing (Fig I).
Inserting and removing bits
This drill/driver has a keyless chuck, which means that a
chuck key is not needed to
secure a bit in the drill/driver.
1. Open the chuck (1) by unscrewing it in an anti-
clockwise direction, holding the drill/ driver as shown
(Fig J).
Do this suciently enough to allow the drill/ driver bit
Operation
OPEN
CLOSE
J.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone CDT214XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone CDT214XA in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info