724617
21
Zoom out
Zoom in
Previous page
1/32
Next page
16V Lithium-ion Cordless Drill
AFTER SALES SUPPORT
(toll free) MODEL No.: CDT214XA • 05/2019 • 1956
e-mail: info.aldi@positecgroup.com
AUS
19
1300 889 028
AUS
to enter the jaws of the chuck.
2. Ensure the drill/driver bit is fully inserted, so that the chuck jaws grip the straight
section of the bit. Rotate the chuck clock-wise until the jaws tighten on the drill/
driver bit.
The collar of the chuck needs to be tightened rmly to ensure the drill/driver bit is
held securely.
To remove the drill/driver bit, rotate the chuck sharply in an anticlockwise
direction, suciently enough to allow the drill/driver bit to be removed.
NOTE: This device is tted with spindle lock and the chuck is a one handed
operation.
Drill/driving
Drill/driving metals
Always clamp sheet metal.
Support thin metal with a block of wood to avoid distorting it.
Use a punch to mark the centre of the hole.
Use a suitable lubricant for the material you are working on.
USE: FOR:
Oil Steel
Turpentine or paran Aluminium
Do not lubricate Brass, copper or cast iron
Do not lubricate Concrete based material
Drill/driving plastics and plastic coated chipboard
Use high speed drill/driver bits
See drill/driving wood below
Drill/driving wood
Clamp a piece of scrap wood to the back of your work to prevent splintering.
All drill/driving operations
Mark o the centre of the hole using a centre punch or nail
Don’t force the drill/driver, let it work at its own pace.
Operation
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Workzone CDT214XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Workzone CDT214XA in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info