690821

Wmf Lumero - 12360011 Manual

14
Zoom out
Zoom in
Previous page
1/83
Next page
26 27
EN
Cooling the device after frothing milk
Note: In order to avoid burnt coffee, allow the espresso machine to cool down after frothing milk.
Proceed as follows to speed up the cooling process:
1. Place a container under the steam nozzle;
2. Turn the knob to the hot water output symbol (G4) ->
until water comes out.
3. The device is now in standby mode again.
Hot water preparation
1. The device is in standby mode.
2. Place a container under the steam nozzle.
3. Turn the knob to the right to hot water output (G4) ->
and hold – the hot water comes out of
the steam nozzle.
Note: The water output stops automatically after 60 seconds.
Cleaning
Hazard!
Remove the mains plug of the device before moving and cleaning and allow the device to cool down!
The basic unit and its individual parts must not be cleaned in a dishwasher.
Note:
Do not use solvents or abrasive detergents to clean the coffee machine.
Cleaning the coffee portafilters
1. Empty the portafilter.
2. Remove the portafilter from the holder and wash in clean water.
Note: Clean the coffee portafilters regularly and check whether the small holes in the portafilter are
blocked and unblock them with a needle if necessary.
Cleaning the collection tray
The collection tray has a float (red) to show the water level.
Empty and clean the collection tray before the float rises above the cup tray, otherwise the water
could overflow and damage the espresso machine, the work surface or the surrounding area.
1. Remove the cover of the drip tray.
2. Clean the removable parts with warm soapy water, rinse well and allow to dry.
3. Replace the cover of the drip tray.
Cleaning the portafilter holder
After 200 uses, clean the portafilter holder (E) -> by dispensing around 0.5 l water without making
coffee.
Cleaning the steam nozzle
1. Hold a cup under the steam nozzle so that the bottom half of the nozzle is in the cup.
2. Allow some hot water to flow out for around 5 seconds in order to remove any milk residues inside
the steam nozzle.
3. Switch the device off by pressing the On/Off button.
4. Pull the tube of the steam nozzle downwards.
5. Carefully clean the steam nozzle (H) with lukewarm water.
6. Fit the pipe back onto the steam nozzle (H).
Cleaning the water tank
Regularly clean the water tank with a soft cloth and a little mild detergent.
Sleep Mode
The device automatically switches into sleep mode after 30 minutes. The 1-cup button -> lights
up in red.
Permanent device settings:
This machine has various default settings for water hardness, coffee temperature and volume of water
per cup. These settings can be adjusted individually. Proceed as follows to access the programme menu
for permanent settings:
Activating the programme menu:
Proceed as follows to access the programme menu for water hardness and coffee temperature:
1. Switch off the device ->
2. The knob ->
is in Position 0
3. Press and hold the 1-cup button ->
and 2-cup button -> at the same time
4. Switch on the device ->
switch on
5. The 1-cup button ->
lights blue and the 2-cup button -> lights red.
Note: If you do not press any buttons for 10 seconds, the device automatically exits the programme
menu and starts the heating phase.
… 14 …


Need help? Post your question in this forum.

Forumrules
1

Forum

wmf-lumero---12360011

Reset search

  • Why is the 1cup button of lumero WMF blinking color blue? What is the problem? Submitted on 30-1-2022 at 18:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wmf Lumero - 12360011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wmf Lumero - 12360011 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 37,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wmf Lumero - 12360011

Wmf Lumero - 12360011 User Manual - English, German - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info