807264
7
Zoom out
Zoom in
Previous page
1/8
Next page
Carefully route the lighting board cable and secure to the framework with cable ties.
It is important that the cable is not trapped or stretched and is tted to allow for the
tilt mechanism to tilt and slide without interference from the cable or without
damaging the cable.
Ensure that the cable does not hang
so as to catch the oor whilst driving. page 10 page 7
Slide 2 bolts into the T channel to the positions shown.
A A
A
Note:You may need to tilt the platform to gain
better access to some of the bolts underneath.
Mount the lighting board to the carrier using bolts .
x 2
M6 x 75
B
Secure the lightboard
to the carrier with bolts
“B” placing a washer at
the top and bottom.
B
Tighten the Nyloc
nut to 4 Nm.
Push the plastic end caps into the cycle rails .
Cable tie points
Mount the 4 rails, secure with the washer and nut underneath the sub-frame.
Do not over tighten!
4.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Witter ZX404 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Witter ZX404 in the language / languages: English as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info