807264
6
Zoom out
Zoom in
Previous page
1/8
Next page
9. Positioning and xing the bikes on the carrier.
Bike 1:
Place the biggest/heaviest bike on the carrier rst, closest to the vehicle.
Position the wheels into the tyre locators and attach the shortest clamp arm
from the cycle support frame around the bike frame.
Secure the wheels in the locators using the straps. Pull down on the strap
until tight.
Bike 2:
Fits in the second set of locators with the medium clamp arm attached
to the bike frame.
Secure the wheels in the locators using the straps. Pull down on the strap
until tight.
Bike 3:
Fits in the third set of locators with the long clamp arm attached to the
bike frame.
Secure the wheels in the locators using the straps. Pull down on the strap
until tight.
Bike 4:
Fits in the outer locators (this should be the smallest/lightest bike) using the
bike to bike clamp arm attached to the bike frame from the previous
bike frame.
Ensure the adaptor is positioned
correctly for both the plug and socket.
K
Check all xtures
and bolts!
M
L
J
Attach the 13 pin plug into the vehicle 13 pin electrical socket.
If your vehicle is tted with a 7 pin socket,
use a 13 to 7 pin adaptor (supplied) to
convert the cycle carrier 13 pin plug.
IMPORTANT: Check light function!
page 6page 11
+
IMPORTANT! Safety pins MUST be inserted and closed fully.
Lift up cycle support arm.
Position and tighten retaining
thumb screws.
Slot groove onto pin whilst hooking over rear of
base plate to hold carrier in position.
3.
I
I
8.
IMPORTANT! Check Safety pins are inserted and closed fully.
I
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Witter ZX404 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Witter ZX404 in the language / languages: English as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info