807264
2
Zoom out
Zoom in
Previous page
1/8
Next page
page 15
x 8
x 2 x 8
x 8
M6 x 55 M6 x 30 M5 x 40
x 3 x 2
M16 x 60
x 6
x 2
A
C
DE
F
GH
page 2
J
I
K
L
M
Nx 4
LB x 1
RP x 5
P
Self
Tapper
x 4
ST
Tilt Latch play adjustment.
The cycle carrier has been designed with an adjustment
feature to minimise any play within the tilt mechanism.
These adjusters are set at the factory.
However over time, it maybe necessary to re-adjust to
ensure continued optimum performance from your
cycle carrier. If adjustment is required it is very
important that it is carried out correctly.
IMPORTANT!
The play adjustment screws should only be used to remove the gap between
the carrier stop rubber and the platform, do not over extend this as it will
prevent the latch on the tilt mechanism from engaging fully into the latch
receiver.
The handle and latch should operate smoothly and the latch should be able
to click securely back into its engaged position.
If this is not the case, then the adjustment screws may have been over extended
and should be backed o to allow full smooth latch operation.
Maintenance:
It is important to maintain the cycle carrier in a safe condition for use.
Periodically check the carrier and ensure the bolts and xtures are tight.
If the tilt mechanism becomes sti to operate it is important to apply a
silicone based grease to the sliding parts of the mechanism.
M6 x 75
B
Platform
Adjustment
screws
Base
x 1
x 16
Carefully remove cover.
Fully engage the latch into the receiver (Green position).
If the platform has excessive play, carefully adjust the screws half a turn at a time to
remove most of the play.
Note: Leave a little play in, so the latch can freely move into the receiver.
Do not over extend as the
platform will raise and the
latch mechanism will not
engage properly.
Gap
New reduced gap
1-2mm
AD
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Witter ZX404 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Witter ZX404 in the language / languages: English as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info