Touch the On sensor for at least 1 second. The touch control panel switches on, an acoustic signal sounds and the displays light up. If one of the cooking zones is hot, the
characters “H” and “0” alternate on the corresponding display.
To switch off, press the same button until the hob switches off. All the cooking zones are deactivated
Activation and adjusting cooking zones
After switching the hob on and placing the pot on the chosen cooking zone, adjust the power level using the + button. Upon activation, the display shows level 5. Each cooking
zone has various power levels, adjustable with the +/- buttons, going from “1”: min. power level, to “9”: max. power level. Some cooking zones have a fast boil function
(Booster), shown on the display with the letter “P”.
For quick activation at max. power: with the cooking zone set to 0, touch the - button once.
The cooking zone switches on directly at level 9. If one of the two + or - buttons is kept pressed, the action is repeated every half a second, without having to press repeatedly.
Power limitation
This hob model has a max. power limitation carried out by means of software. Therefore, to activate a cooking zone at a power higher than that allowed, the system emits an
acoustic signal and automatically adjusts the power to the max. permissible.
E.g. Assuming the user has set the following levels, utilising all the permissible power:
If the + button is pressed to increase the power level of the diam. 145 zone, the system emits an acoustic signal and will not increase the power level.
By reducing the power level of one of the other zones, the diam. 145 zone can be adjusted, increasing the power.
Deactivation of cooking zones
Press the “-” button of the cooking zone to be switched off, until bringing the level to “0”. The cooking zone can also be switched off by touching the “+” and “-” buttons at the
same time. The cooking zone is deactivated.
Switching off the hob
The hob can be switched off by pressing the button . An acoustic signal sounds and the power level indicators go off, with the possible exception of the residual heat indicator
“H”, which remains on if the cooking zone is hot.
The hob automatically switches off if no function is selected within 10 seconds of switching on.
The cooking zone switches off and, if the zone is still hot, the letter “H” appears in the circle.
“H” is the residual heat indicator. The hob has such an indicator for each cooking zone; it signals which zones are still hot. When the cooking zone cools down,
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Whirlpool ACM 723 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Whirlpool ACM 723 in the language / languages: English, Dutch, French, Italian as an attachment in your email.
The manual is 12,25 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
