585250

Weller WD 2 Manual

46
Zoom out
Zoom in
Previous page
1/171
Next page
"STANDBY" appears in the display. The setback status is
ended by pressing the UP or DOWN button.
Change the setback time with the UP or DOWN button.
Switch to the previous menu item with I.
Switch to the next menu item with II.
5.1.5 Window function
Restriction of the temperature range to a max. ±99°C
(± 180°F) beginning with a previously locked temperature
(see 5.1.7). The locked temperature thus represents the
middle of the settable temperature range.
Use the UP/DOWN buttons to change the window size.
Switch to the previous menu item with I.
Switch to the next menu item with II.
5.1.6 °F/°C Switch-over
Switching the temperature version from °C to °F and vice
versa.
Use the UP/DOWN buttons to switch between °C and °F.
Switch to the previous menu item with I.
Switch to the next menu item with II.
39
5.1.2 Temperature switch-off Off time
When the soldering tool is not in use, the heating system of
the soldering tool is switched off when the Off time has elap-
sed.The temperature can be set from 0 – 999 minutes. With
a setting of "0 min", the setback function is switched off.The
temperature switch-off is carried out independently of the
set setback function. The actual temperature is displayed
(flashing) and serves as a residual heat indication; "OFF"
appears in the display. Below 50°C (150°F), a flashing dash
appears.
Change the off time with the UP or DOWN button.
Switch to the previous menu item with I.
Switch to the next menu item with II.
5.1.3 Temperature offset
The actual soldering tip temperature can be changed by
±40°C/±72°F by inputting a temperature offset.
Change the offset value with the UP or DOWN button.
Switch to the previous menu item with I.
Switch to the next menu item with II.
5.1.4 Setback time
If the soldering tool is not being used, the temperature is
decreased automatically to standby temperature (see 5.1.1)
after the specified setback time has elapsed. The setback
time, after which the soldering station switches to standby
mode, can be set from 0 – 99 minutes. With a setting of
"0 min", the setback function is switched off. The setback
status is indicated by a flashing actual value display and
English
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weller WD 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weller WD 2 in the language / languages: All languages as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info