802209
17
Zoom out
Zoom in
Previous page
1/379
Next page
EN
5110757E OI II Webasto Pure 5
7Required tools
Tool description Amount
Slot-head screwdriver 0.5x3.5mm 1
Torx screwdriver Tx25 1
Torx screwdriver Tx10 1
Torque wrench (range covers 5-6Nm, for
Tx25)
1
Torque wrench (range covers 4-5Nm, for
open-ended spanner size 29)
1
Drilling machine with 8 mm drill 1
Hammer 1
Measuring tape 1
Spirit level 1
Wire stripping tool 1
Installation tester 1
EV simulator with rotary field display 1
Round file 1
Combination pliers 1
8Installation and electrical
connection
DANGER
Observe the safety information provided here
chapter2, "Safety" on page 1.
To access further documents use one of the following
options:
Webasto Service app (for installation)
To download this app:
uscan the QR code below or
ugo to:
https://apps.apple.com/ (Apple App Store) or
https://play.google.com/ (Google Play Store) as ap-
propriate.
To use the Webasto Service App and access online
Webasto technical documentation, please scan the QR
code or the barcode on your Webasto product box.
You can find our operating instructions on the Webasto
website at:
https://charging.webasto.com/int/products/
documentation
All languages can be found in the download portal on
our website.
NOTE
The Webasto Pure safety concept is based on a power
supply system that is earthed at all times, which must
always be ensured by an electrician during installa-
tion.
8.1 Requirements installation space
The following points must be take into account when se-
lecting the installation location for the Webasto Pure:
The lower edge of the enclosed mounting template
must be a minimum distance of 90cm above the
ground during installation. (See Fig. 14)
If several charging stations are installed next to each
other, a spacing of at least 200 mm must be main-
tained between each station.
The mounting surface must be solid and strong.
The mounting surface must be completely flat (max. 1
mm difference between the individual mounting
points).
The mounting surface must not contain any flam-
mable substances.
A cable run from the charging station to the vehicle as
short as possible.
No risk of driving over the charging cable.
Possible electrical connections from infrastructure.
Pavements and escape routes must not be obstructed.
We recommend an installation location that is protec-
ted against direct sunlight for optimum and fault-free
operation.
The usual parked position of the vehicle, taking ac-
count of the position of the charging plug on the
vehicle.
Consideration of local building and fire protection reg-
ulations.
NOTE
The mounting distance between the bottom edge of
the charging station and the floor must be at least 0.9
m.
8.2 Criteria for the electrical connection
The maximum charging current is factory set and is indic-
ated on the type label of the charging station. The max-
imum charging current can be reduced to the value of
the installed circuit breaker using DIP switches.
NOTE
The current value of the selected protective device
must not fall below the current value specified on the
type label for the charging station or the value set us-
ing the DIP switch.
See chapter8.6, "DIP switch settings" on page 7.
The installation requirements for the charging station
should be checked by a qualified electrician before start-
ing connection works.
Comply with the nationally applicable regulations of the
authorities and power supply companies, e.g. registration
of installation of a charging station.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto Pure II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto Pure II in the language / languages: All languages as an attachment in your email.

The manual is 28.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info