649001

Wagner Super Finish 27 Manual

8
Zoom out
Zoom in
Previous page
1/30
Next page
Super Finish 27 • 31
30
GB
Description of unit / Starting operation
 
Super Finish
27
Super Finish

Voltage: 230 Volt~,50 Hz
Fuse protection: 16 A slow-blow
Voltage on multifunction
switch: 24 V
Unit connection line: 6 m long, 3 x 1.5 mm²
Socket on unit: 230 Volt ~,50 Hz
Max. connection: 1000 Watt
Type of protection: IP 44 IP 54
Capacity: 1.5 kW 1.7 kW
Max. operating pressure: 250 bar (25 MPa)
Max. volume ow: 3.0 l/min
3.5 l/min
(220 Volt~,
60 Hz)
3.5 l/min
Volume ow at 120 bar
(12 MPa) with water:
2.5 l/min
3.1 l/min
(220 Volt~,
60 Hz)
3.2 l/min
Max. size of tip: 0.027 inch
– 0.69 mm
0.031 inch
– 0.79 mm
Max. temperature of the
coating material: 43°C
Max. viscosity: 25.000 mPa·s
Net weight: 40 kg 43 kg
Hydraulic lling quanitity: 0.9 Litre, ESSO NUTO H 22
Max. tyre pressure: 2 bar (0.2 MPa)
Max. acoustic pressure
level:
74 dB (A)*
*Place of measuring: 1 m in distance from the unit and 1.6 m
above the oor, 120 bar (12 MPa) operating pressure, reverber-
ant oor
 
Push or pull unit.
Loosen terminal sleeves (g. 5, item 1) on the shaft ( open).
Extract shaft to the desired length.
Tighten terminal sleeves again by hand ( closed).
3
5
4
1

Unroll high-pressure hose and lay it over the shaft. Secure the
unit by means of suitable fastening.
4. 
 
Screw o dust protection cap (g. 6, item 1).1.
Pay attention to clean sealing areas on the connections.
2.
Pay attention to the fact that the red inlet (2) is inserted into
the coating material inlet.
Screw and tighten the union nut (3) on the suction pipe (4) 3.
onto the coating material inlet (5) with the accompanying
spanner 41 mm.
Screw the union nut (6) on the return pipe (7) onto the
4.
connection (8).
3
5
4
6
3
4
5
7
1
8
2
4.2 
Screw o dust protection cap (g. 7, item 1).1.
Pay attention to clean sealing areas on the connections.
2.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wagner Super Finish 27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wagner Super Finish 27 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info