649001

Wagner Super Finish 27 Manual

10
Zoom out
Zoom in
Previous page
1/30
Next page
Super Finish 27 • 31
32
GB
Starting operation/ Spraying technique
Attention
Completely unroll a connected cabledrum.
Attention
So that in switching on the unit the mains
fuse protection of 16 A does not react: Always
switch on the Super Finish 27 or31 unit rst
and then the connected unit.
5. 
Guide the spray gun evenly during the spraying process. If
this is not observe, an irregular spraying appearance will be
the result. Spray with the arm and not with the wrist. Maintain
a parallel distance of approx. 30 cm, between the spray gun
and object of spraying. The lateral limitation of the spray jet
should not to be too distinct. The edge of the spraying should
be gradual to facilitate overlapping of the next coat. Always
guide the spray gun parallel to and at an angle of 90°to the
spraying area; in this way the least paint cloud arises.
i
If very distinct edge zones appear and streaks
in the spray jet – increase operating pressure or
dilute coating material.
 

Avoid bending or folding the high-pressure hose sharply;
smallest bending radius approx. 10 cm.
Do not run over the high-pressure hose and protect it from
sharp objects and edges.
Attention
There is danger of injury as a result of a leak-
ing high-pressure hose. Replace high-pressure
hose immediately.
Never repair the high-pressure hose your-self!

The unit is equipped with high-pressure hose specially suited
for diaphragm pumps.
i
For reasons of function, safety and durability,
only use original WAGNER high-pressure hoses.
7. 
Switch o unit, set multifunction switch to
1.
(pressure
relief, circulation), then to (OFF).
Secure spray gun, see operating manual for spray gun.2.
If the tip is to be cleaned, see page 45, point 13.2.3.
3
5
4
1
2
4.7 

1.
Super Finish 27
Attention
Before mounting suction system or upper hopper,
check inlet valve for functionality. Press inlet valve
with a soft implement (e.g. a pencil); it must allow
movement.
2.

Submerge suction pipe into a container lled with coating
material.
3.

Fill coating material into the upper hopper.
4.

Press inlet valve trigger (g 11, item 1) several times to
release possibly clogged inlet valve.
Set multifunction switch (2) to
5.
(ON - circulation); the
unit will start. Turn pressure regulating knob (3) to the right
until stop.
When the sound of the valves can be heard clearly, the unit 6.
is ventilated.
Set multifunction switch (2) to
7.
(spray). Pull trigger guard
of spray gun, then set the desired operating pressure by
means of the pressure regulating knob (3).
The unit is ready for spraying.8.
3
5
4
1
2
3
4.8 
It is possible, for example, to connect an agitator, a working
lamp etc with a .
Interruption of work
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wagner Super Finish 27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wagner Super Finish 27 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info