649001

Wagner Super Finish 27 Manual

6
Zoom out
Zoom in
Previous page
1/30
Next page
Super Finish 27 • 31
28
GB
Description of unit
i
Attention: Make sure, when stirring up with
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying and
can, in fact , lead to interruption of operation.

With this unit it is possible to process highly viscous coating
materials of up to around 25.000 mPa·s.
If highly viscous coating materials cannot be taken in by suc-
tion, they must be diluted in accordance with the manufac-
turer’s instructions.

The appropriate processing time must be adhered to exactly.
Within this time rinse through and clean the unit meticulously
with the appropriate cleaning materials.
    
materials
These have a strong wear and tear eect on valves,
high-pressure hose, spray gun and tip. The durability of
these parts cane be reduced appreciably through this.

 
The main areas of application are thick layers of highly viscous
coating material for large areas and a high consumption of
material.
A diaphragm pump takes in the coating material by suction
and conveys it to the tip. Pressed through the tip at a pressure
of up to a maximum of 250 bar (25 MPa), the coating material
is atomised. This high pressure has the eect of micro ne at-
omisation of the coating material.
As no air is used in this process, it is described as an AIRLESS
process.
This method of spraying has the advantages of nest atomisa-
tion, cloudless operation and a smooth, bubblefree surface. As
well as these, the advantages of the speed of work and con-
venience must be mentioned.
 
In the following there is a short description of the technical
construction for better understanding of the function.
WAGNER Super Finish 27 and 31 are electrically driven high-
pressure spraying units.
The electric motor (g. 2, item 1) drives the pump by means of
a toothed belt (2).
In the pump the diaphragm (3) is moved up and down by
means of hydraulic oil.
The inlet valve is opened independently through the down-
ward movement of the diaphragm.
The outlet valve is opened by means of the upward movement
of the diaphragm. The coating material ows under high pres-
sure through the high-pressure hose to the spray gun. The
coating material is atomised when owing out of the tip.
The pressure regulating valve (4) controls the operating pres-
sure and the quantity of the conveyed coating material.
3
5
4
1
2
4
3
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wagner Super Finish 27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wagner Super Finish 27 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info