Manual Voltcraft AT-200 (page 30 of 62) (English, German, French)

536151

Zoom out

Zoom in

1/62

b) Resistance measurement, diode test,acoustic continuity

check and capacity measurement

Make sure that all the circuit parts, switches and components and

other objects to be measured are disconnected from the voltage

and currentless at all times.

Proceed as follows for the measurement:

- Connect the black measuring line with the COM socket

(7) and the red measuring line with the VΩ-socket (6) till

they are plane at the measuring instrument.

- Set the range selection switch (5) to position

CAP.

- You are in the resistance measurement range. You can

select the other measuring functions by pressing the

"MODE" button (9).

- Check the measuring lines for continuity by connecting

both measuring prods to one another. After that the

resistance value must be approx. 0 ohm.

- Now connect the measuring prods to the object to be

measured. As long as the object to be measured is not

high-resistive or is interrupted, the measured value will

be displayed on the display (1).

If you carry out a resistance measu-

rement, make sure that the measu-

ring points which you contact with

the measuring prods are free from

dirt, oil, solderable lacquer or simi-

lar. Such circumstances can falsify

the measured result.

Make sure that the polarity of unipolar capacitors (polarised) is cor-

rect ("+" and "-").

The supplied multipurpose plug can be used for an easier handling.

As soon as "OL" (overload) appears on the display, you have excee-

ded the measuring range or the measuring circuit has been broken.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft AT-200 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Voltcraft AT-200 Manual

Product: