536151

Voltcraft AT-200 Manual

31
Zoom out
Zoom in
Previous page
1/62
Next page
31
c) Frequency measurement
ƽ
In no event exceed the max. permitted input values. Do not contact
circuits or parts of circuits if you measure voltages higher than 25V
ACrms or 35V DC pending within them.
Proceed as follows to measure the frequency:
- Connect the black measuring line with the COM socket (7) and the red measuring
line with the VΩ-socket (6) till they are plane at the measuring instrument.
- Set the range selection switch (5) to position "Hz".
- Now connect the two measuring prods to the object to be measured (generator,
switching etc.).
- The current measuring value is shown on the display (1).
Proceed as follows to measure the pulse-pause ratio (duty cycle):
- Press the “Hz/%” button (2). You switch over these two measuring functions. The
measurement unit "%" appears on the display.
- Now connect the two measuring prods to the object to be measured (generator,
switching etc.). The current measuring value is shown on the display (1).
d) Temperature measurement
ƽ
In no event exceed the max. permitted input values. Do not contact
circuits or parts of circuits if there could be voltages higher than
25V ACrms or 35V DC pending within them !
The temperature measurement can be performed only at the connection sockets (6)
= + and (7) = - and only by means of K-type thermosensors. Use the multipurpose
plug with the correct polarity for connecting the thermosensor.
The temperatures may only be applied at the sensor. The measuring instrument is
only specified (guaranteed precision) for an ambient temperature of 23°C (+/-5°C).
Proceed as follows to measure temperatures:
- Remove all measuring lines from the multimeter and set the range selection switch
(5) to position "C" or "F" (Fahrenheit).
- Insert the enclosed multipurpose plug with the correct polarity into the sockets (6)
and (7).
- Now, insert the plug of the K-type thermosensor with the right polarity (narrow
contact stud = +) into the multipurpose plug. Then, the temperature is indicated in
"°C" (Celsius) or "°F" (Fahrenheit) on the display.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft AT-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft AT-200 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info