667332

Viking MT 5097 Manual

36
Zoom out
Zoom in
Previous page
1/290
Next page
0478 192 9807 C - EN
34
● MT 5112 C, MT 6112 C, MT 6112 ZL,
MT 6127 ZL:
With the mowing deck removed, press
the V-belt tensioner lever forwards and
lock in place. (Ö 14.1)
● Start the engine. (Ö 13.2)
Forward driving:
● Select the forward driving
direction. (Ö 8.9)
● Disengage the parking brake, if
engaged. (Ö 8.14)
● Actuate the drive pedal – the machine
moves forwards. (Ö 8.12)
Reversing:
● Select the reverse driving
direction. (Ö 8.9)
● Disengage the parking brake, if
engaged. (Ö 8.14)
● Actuate the drive pedal – the machine
moves backwards. (Ö 8.12)
Forward driving with cruise control
(MT 6112 ZL, MT 6127 ZL):
● With the mowing deck removed, press
the V-belt tensioner lever forwards and
lock in place. (Ö 14.1)
● Start the engine. (Ö 13.2)
● Set the throttle lever to the MAX
position. (Ö 8.3)
● Set the driving direction selector lever
to the front position (forward driving
direction). (Ö 8.9)
● Disengage the parking brake, if
engaged. (Ö 8.14)
● By pressing the drive pedal, the driving
speed is regulated and the machine
moves forward.
● Activating cruise control:
Maintain the required driving speed and
press the cruise control button for 1
second. (Ö 8.7)
Cruise control is activated when the
"cruise control active" symbol appears
on the display and the drive pedal is
locked in place.
When cruise control is activated, it is
possible to increase the set driving
speed by pressing on the drive pedal.
● The foot can be removed from the drive
pedal.
● Deactivating cruise control:
Actuate the brake pedal or press the
cruise control button. (Ö 8.7)
Cruise control is deactivated when the
"cruise control active" symbol
disappears from the display.
13.5 Braking
● Reduce the driving speed by easing the
pressure on the drive pedal – avoid
braking abruptly at the maximum
driving speed. (Ö 8.12)
● Press the brake pedal down evenly until
the machine comes to a
standstill. (Ö 8.13)
13.6 Adjusting the cutting height
● Brake the machine to a complete
standstill.
● Release the cutting height adjustment
lever and set the required cutting
height. (Ö 8.15)
13.7 Mowing
Before mowing:
● Read and observe the section "Notes
on working with the machine". (Ö 11.)
● Always set the maximum engine speed
during mowing. The mowing blade is
optimised for this speed – it produces
the best cutting pattern as well as the
most powerful suction effect for
collection of the clippings.
Engage the mowing deck in the
following sequence:
● Start the engine. (Ö 13.2)
● Set the throttle lever to the MAX
position. (Ö 8.2), (Ö 8.3)
Risk of injury!
Adjust the cutting height only when
the ride-on mower is at a standstill.
Level 1 Lowest cutting height
Level 8 Highest cutting height
MT 5112 Z, MT 6112 C,
MT 6112 ZL, MT 6127 ZL:
VIKING recommends mounting the
two gauge wheels in a lower bore.
In the lowest position, the gauge
wheels increase the distance
between the mowing deck and the
ground, ensuring an optimum
supply of air. The result is a more
attractive cutting pattern and better
collecting performance.
If the mowing deck is engaged
when driving, the engine speed is
briefly reduced due to the additional
load (mowing blades starting to
rotate).
… 36 …


Need help? Post your question in this forum.

Forumrules
1

Forum

viking-mt-5097

Reset search

  • how do i replace the transmission cable on the Viking MT 5097.oz Serial number 980075680
    Submitted on 4-10-2024 at 18:46

    Reply Report abuse

  • I need to change the ground drive belt in my MT 5097. Are there any instructions available for this? Submitted on 4-4-2022 at 18:58

    Reply Report abuse

  • I need to replace the drive belt in my MT 5097. Are there any instructions available for this? Submitted on 4-4-2022 at 18:57

    Reply Report abuse

  • Hello,
    We Have a Viking MT 5097Z.
    The engine stopped at once.
    When i turn on the Key to run it, the 10A fuse melts (twice) - not the 15A fuse.
    Is it possible one relay is broken (short-circuit) ? - N° 18,19, 25, 26 on the electric map -
    Or what other possibility?
    Thank's for your answer
    Best regards
    Franck
    Submitted on 4-1-2022 at 12:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 5097 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 5097 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 5097

Viking MT 5097 User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info