667332

Viking MT 5097 Manual

35
Zoom out
Zoom in
Previous page
1/290
Next page
ENES
33
PTEL
0478 192 9807 C - EN
Fit and screw on the tank cap (1) (note
direction of arrow). Then tighten the tank
cap (1) hand-tight.
● Wipe away any spilled fuel and allow it
to evaporate before starting the engine.
13.2 Starting the engine
Before starting:
● Check the engine oil level. (Ö 15.8)
● Remove grass residues from the
mowing deck and engine compartment.
● Check the fuel and top up if
necessary. (Ö 13.1)
● Before each use, check the braking
function. (Ö 13.5)
● Perform all personal settings (driver's
seat adjustment) on the machine – not
when the engine is running!
● Never start the machine in the vicinity of
other persons, particularly children, or
animals.
Starting sequence:
● Open the fuel cock. (Ö 15.7)
● Sit on the driver's seat.
● Before starting, press the brake pedal
to the stop and hold or engage the
parking brake. (Ö 8.13), (Ö 8.14)
● Insert the ignition key in the ignition lock
and turn to the "ignition on" position.
(Ö 8.1)
● Cold engine:
MT 5097, MT 5097 C, MT 6112 C:
Set the throttle lever to the choke
position. (Ö 8.2)
MT 5097 Z, MT 5112 Z, MT 6112 ZL,
MT 6127 ZL:
Set the throttle lever to the MAX
position and pull the choke knob.
(Ö 8.3), (Ö 8.4)
Warm engine:
Set the throttle lever to the MAX
position. (Ö 8.2), (Ö 8.3)
● Turn the ignition key to the "start
engine" position.
The engine starts. As soon as the
engine is running, release the ignition
key. This returns automatically to the
"engine running" position.
● MT 5097, MT 5097 C, MT 6112 C:
Return the throttle lever to the MAX
position when the engine is running.
Note detent! (Ö 8.2)
MT 5097 Z, MT 5112 Z, MT 6112 ZL,
MT 6127 ZL:
Press in the choke knob. (Ö 8.4)
● When the engine is running, the foot
can be removed from the brake pedal or
the parking brake released.
13.3 Stopping the engine
● Brake the machine to a complete
standstill.
● Disengage the mowing deck.
(Ö 8.5), (Ö 8.6)
● Set the throttle lever to the MIN
position. (Ö 8.2), (Ö 8.3)
● Turn the ignition key to the "engine off"
position. The engine is stopped.
● Engage the parking brake. (Ö 8.14)
● Close the fuel cock if necessary.
(Ö 15.7)
● Remove the ignition key and store
safely.
13.4 Driving
Before driving:
● Engage the gearbox freewheel
lever. (Ö 8.18)
Avoid damage to the machine.
If the engine does not start
immediately, leave breaks between
the starting attempts.
Never leave the ignition key in the
"start engine" position for more than
10 seconds.
The discharge chute must be
correctly installed to start the
engine. (Ö 15.6)
Warning!
A low driving speed must always be
selected on rough terrain.
Before each change of direction,
especially on slopes, reduce the
driving speed appropriately.
Avoid damage to the machine.
In order to ensure optimum cooling
of the gearbox, always drive at the
maximum engine speed. Therefore
only regulate the driving speed
using the drive pedal and not the
throttle lever.
… 35 …


Need help? Post your question in this forum.

Forumrules
1

Forum

viking-mt-5097

Reset search

  • how do i replace the transmission cable on the Viking MT 5097.oz Serial number 980075680
    Submitted on 4-10-2024 at 18:46

    Reply Report abuse

  • I need to change the ground drive belt in my MT 5097. Are there any instructions available for this? Submitted on 4-4-2022 at 18:58

    Reply Report abuse

  • I need to replace the drive belt in my MT 5097. Are there any instructions available for this? Submitted on 4-4-2022 at 18:57

    Reply Report abuse

  • Hello,
    We Have a Viking MT 5097Z.
    The engine stopped at once.
    When i turn on the Key to run it, the 10A fuse melts (twice) - not the 15A fuse.
    Is it possible one relay is broken (short-circuit) ? - N° 18,19, 25, 26 on the electric map -
    Or what other possibility?
    Thank's for your answer
    Best regards
    Franck
    Submitted on 4-1-2022 at 12:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MT 5097 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MT 5097 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 24,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viking MT 5097

Viking MT 5097 User Manual - German, Dutch, French, Italian - 284 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info