815507

Vermont Castings Radiance Series Manual

16
Zoom out
Zoom in
Previous page
1/56
Next page
1616 3-90-30007498Vermont Castings • Radiance RADVT Installation Manual_R32 • 10/23
Figure 3.2 - Attach inner assembly to ue collar.
ST647
attach inner assy
SLP or 46DVA
Venting
CCSLP
Starter
Pipe
AssembleSlipSections
The outer ue of the slip section should slide over the outer
ue of the pipe section and into (inner ue) the last pipe
section, Figure 3.4.
Slide together to the desired length, making sure that a 1-1/2”
outer ue overlap is maintained between the pipe section
and slip section.
The pipe and slip section need to be secured by driving two
1/2 in. screws through the overlapping portions of the outer
ues using the pilot holes, Figure 3.5.
This will secure the slip section to the desired length and
prevent it from separating. The slip section can then be
attached to the next pipe section.
If the slip section is too long, the inner and outer ues of the
slip section can be cut to the desired length.
WARNING
!
Risk of Fire/Explosion! DO NOT break seals on slip
sections. Use care when removing termination cap from
slip pipe. If slip section seals are broken during removal
of the termination cap, vent may leak.
Secure the Vent Sections
Vertical sections of SLP pipe must be supported every 8 feet.
The SLP restop includes tabs that may be used to secure
vertical sections.
The vent support or plumber’s strap (spaced 120° apart) may
be used to secure the vertical sections of pipe, Figure 3.6.
Horizontal sections of vent must be supported every 5 feet
with a vent support or plumber’s strap, Figure 3.7.
INCORRECTCORRECT
Figure 3.3 - Make sure the seams are not aligned to prevent
unintentional disconnection.
Figure 3.4 - Slip Section Pilot Holes
Figure 3.5 - Screws into Slip Section
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermont Castings Radiance Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermont Castings Radiance Series in the language / languages: English as an attachment in your email.

The manual is 6.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermont Castings Radiance Series

Vermont Castings Radiance Series User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info