815509

Vermont Castings Intrepid - Gas Manual

18
Zoom out
Zoom in
Previous page
1/64
Next page
1818 3-90-30007474Vermont Castings • Intrepid DV-IFT Owner’s Manual_R28 • 11/23
4. Using appropriate length of pipe section(s) attach to
stove by twisting collar.
5. Measure the horizontal length requirement including a 2”
(51 mm) overlap, i.e. from the elbow to the outside wall
face plus 2” (51 mm) (or the distance required if installing
a second 90° elbow), Figure 3.12.
NOTE: Always install vertical side wall horizontal venting
with a 1/4” rise for every 12” of run.
2. Secure restop to the inside frame, center in the 10" x
10" vent opening.
3. Place stove into position. Measure the vertical height (X)
required from the base of the ue collars to the center of
the wall opening, Figure 3.11.
X
Figure 3.11 - Vertical Height Requirements
Figure 3.10 - Locate vent opening. NOTE: Zero clearance
sleeveisrequiredforcombustiblewallinstallations.
VO584-100a
Vent Opening
7/07 djt
10"
(254 mm)
10"
(254 mm)
7¹⁄₂" Dia.
(190 mm)
Framing Detail
VentOpening-CombustibleWall
VentOpening-NoncombustibleWall
NOTE:Supporthorizontalpipesevery5'(152cm)with
metal pipe straps.
6. Use appropriate length of pipe sections – telescopic or
xed – and install. The sections which go through the
wall are packaged with the starter kit, and can be cut to
suit if necessary.
7. Guide the vent terminations 4" and 6-5/8” collars into
their respective vent pipes. Double check that the vent
pipes overlap the collars by 2" (51 mm). Secure the
termination to the wall with screws provided and caulk
around the wall plate to weatherproof. As an alternative
to screwing the termination directly to the wall, you
may also use expanding plugs or an approved exterior
construction adhesive.
X
Figure 3.12 - Horizontal Length Requirement
SLP Cap
Cutout On Vinyl
Vinyl Siding Wall
Termination Cap
Figure 3.13 - Horizontal Termination Cap on a Vinyl Siding Wall
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermont Castings Intrepid - Gas at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermont Castings Intrepid - Gas in the language / languages: English as an attachment in your email.

The manual is 17.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info