622288
9
Zoom out
Zoom in
Previous page
1/104
Next page
DVM1500
V. 03 04/11/2013 9 ©Velleman nv
Voltage Measurements
Do not measure circuits where voltages > 600 V CAT III or
> 1000 V CAT II may reside.
Always be careful when working with voltages above 60 Vdc or 30 Vac
rms. Keep your fingers behind the probe barriers at all times during
measurement. Do not touch unused terminals when the meter is
linked to a circuit that is being tested.
1.  °CHz

2. Set the rotary switch to V for DC measurements or to V for AC
measurements.
3. Press the RANGE button to manually select the range.
4. Connect the test probes to the source being measured.
The measured value appears on the display.
Note: For DC measurements: if a negative polarity is present at the red test

Resistance Measurements
Do not perform resistance measurements on live circuits.
1.  °CHzlead to

2. Set the 
3. Press the RANGE button to manually select the range.
4. Connect the test probes to the source being measured.
The measured value appears on the display.
Notes:
Never perform resistance measurements on a live circuit and make sure all
capacitors are completely depleted.
To increase accuracy when measuring low resistance values, first hold the
tips of the test probes together to determine the resistance value of the
test leads. Subtract this value from the measured value of the circuit.
For resistance measurements above 1 conds
to stabilize the readout.
If the measured resistance exceeds the current range or in case of an open
OL
Continuity Measurements
Do not perform continuity tests on live circuits.
1.  °CHz

2. Set the rotary switch to .
3. Press the FUNC button to select continuity test .
4. Connect the test probes to the source being measured.
If the measured resistance is less than 40 
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM1500 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info